Shelf With Toilet Paper Holder gives bathrooms, powder rooms, and guest suites a cleaner place for towels and daily essentials. The Shelf With Toilet Paper Holder from Grandmix is a wall-mounted multifunctional fixture pairing a roll bar with a 12-inch-wide shelf above. Available in 3 finishes (Black, White, Gold) at Approximately 12 in / 30 cm H × 12 in / 30 cm W × 5 in / 13 cm D.

Why It Works

• 2-in-1 above-toilet shelf and roll holder: Unlike running a basic wall holder plus a separate accessory shelf, this single fixture covers both, with fewer holes in tile, cleaner sightline, and less wall-fastener planning during install.
• Compact 12-inch shelf footprint: Wide enough for soap, lotion, a candle, a phone, or a small plant; shallow enough (5-inch depth) to keep clear of knee and head room beside the toilet in tighter water closets.
• Powder-coated metal handles bathroom humidity: Unlike unfinished bare metal that can show humidity spots in poorly ventilated bathrooms, the electrostatic powder-coat finish stays uniform under typical bathroom moisture exposure when wiped dry after heavy splash.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Approximately 12 in / 30 cm H × 12 in / 30 cm W × 5 in / 13 cm D
• Capacity: 1 in-use roll on the lower bar + toiletries, decor, or a phone on the upper shelf
• Material: 1.5 mm powder-coated galvanized metal frame + integrated shelf, electrostatic powder-coated
• Finishes: Black, White, Gold
• Weight: About 1.5 kg / 3.3 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the holder's loaded weight.
• Best placement: Above the toilet, beside the sink, primary bathrooms, powder rooms

What's Included

• Wall-mounted shelf with toilet paper holder (assembled, finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting hole positions on the wall using a level. Drill pilot holes (use a tile-specific carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the unit on the screws via the back-mounted brackets. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated metal frame with a soft, dry cloth to remove dust and incidental humidity. For deeper cleaning, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; install outside direct shower-spray zones and wipe dry after heavy moisture exposure.

Frequently Asked Questions

How many rolls and what fits on the shelf?
The lower bar holds 1 in-use roll. The upper shelf comfortably holds toiletries such as a soap dispenser, lotion, a small candle, a phone, or a small plant; short, wide items work best within the 5-inch depth, while tall bottles should stay on a larger countertop or vanity surface.

What walls and hardware does it work with?
Mounting screws and anchors are included for drywall installations. For tile, plaster, or masonry walls, swap to wall-specific anchors rated for the holder's loaded weight; use a tile-specific drill bit (carbide-tipped) at low speed for tile.

Is the powder-coat finish safe for humid bathrooms?
Yes. The powder-coated metal finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do I match the finish to existing bathroom hardware?
Black works with matte-black, chrome, and modern monochrome fixtures; White suits Scandinavian, neutral, and minimalist bathrooms; Gold complements warm metallic faucets, antique brass hardware, and luxury or transitional styles. For the most cohesive look, match the holder finish to the faucet, towel bar, or cabinet pull in your bathroom.

How do I clean the holder?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots or product residue, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page