Metal Minimalist Shoe Rack gives entryways, closets, and mudrooms a more defined place for everyday footwear. The Metal Minimalist Shoe Rack from Grandmix is a free-standing 2-tier organizer with a slim 8-inch depth, a renter-friendly entryway piece that lifts shoes off the floor without drilling. Available in 2 widths (20” / 50 cm and 36” / 90 cm) and 3 finishes (Black, White, Gold).

Why It Works

• Free-standing, no drilling: Unlike wall-mounted racks that require anchors and leave holes when removed, this free-standing rack places on any flat floor, renter-friendly, easy to reposition, and quick to relocate when the entryway gets a refresh.
• Open 2-tier design lets wet shoes dry: Unlike closed cubbies that trap moisture and odor, the open metal tiers let air circulate around shoes, practical for daily indoor pairs, wet shoes after rainy days, and the occasional gym shoe.
• 2 widths for narrow or wide entries: The 20-inch width fits compact apartment foyers and behind-the-door zones; the 36-inch width scales to standard hallway and family entry walls. Both share the same 8-inch slim depth that keeps walking space clear.
• Checked before packing: Edges, coating, and hardware fit are reviewed before shipment so the product arrives ready for standard home installation.

Key Specs

• Sizes: 9" H × 20" W × 8" D (22 × 50 × 20 cm) and 9" H × 36" W × 8" D (22 × 90 × 20 cm)
• Capacity: About 4-6 pairs depending on width (20” holds 3-4 pairs across both tiers; 36” holds 5-6 pairs)
• Material: 15 × 15 mm powder-coated metal pipe, welded, electrostatic powder-coated
• Finishes: Black, White, Gold
• Mounting: Free-standing (no wall mounting; place on a flat, level floor)
• Weight: 3-5 kg / 6-11 lb depending on width; assembled and ready out of the box
• Best placement: Entryway, apartment foyer, hallway, mudroom, behind-the-door zone

What's Included

• 2-tier metal shoe rack (assembled, finish and width as ordered)
• Care instructions

How to Use and Install

The rack ships fully welded and assembled. Place on a flat, level floor in your entryway, foyer, or hallway. Load shoes from the bottom tier upward to keep the center of gravity low. No assembly, no wall hardware, and no drilling required, unbox and use immediately.

Care

Wipe the metal frame with a soft, dry cloth to remove dust. For wet drips from rainy-day shoes, dry the surface promptly with a clean cloth. Avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The rack is designed for indoor use, entryways, hallways, and bedroom closets.

Frequently Asked Questions

How many pairs does each width hold?
The 20” width holds about 3-4 pairs across both tiers (1-2 per tier); the 36” width holds about 5-6 pairs (2-3 per tier). Men's sizes 11+ may fit fewer per slot; women's flats and children's shoes can stack more compactly with smaller pairs.

Does it require assembly?
No. The rack ships fully welded and assembled, so there are no parts to align or screws to tighten. Unbox it, place it on a flat, level floor in your entryway, and load shoes directly. Total setup takes about 30 seconds.

Will it slide on tile or hardwood floors?
The legs rest on rounded contact points. On glossy tile, polished hardwood, or smooth concrete, you may add stick-on felt pads (not included) for extra grip and floor protection. On carpet, matte tile, or textured hardwood, the rack typically stays in place under daily use.

Is it suitable for covered outdoor placement?
The powder-coated finish is designed for indoor use (entryways, hallways, bedroom closets). For covered outdoor placements like screened porches, occasional use is acceptable; for direct rain or pool-deck spray, choose covered locations and wipe dry after exposure.

How do I clean the rack?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots from shoe rubber or wet drips, a damp cloth with mild non-abrasive detergent works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish.

You can check our Shipping Policy page