Woman Figure Rose Metal Wall Art – Bedroom Wall

Woman Figure with Rose Metal Wall Art in a living room

White Woman Figure with Rose Metal Wall Art in a living room

Woman Figure with Rose Metal Wall Art in a bedroom

Size chart for Woman Figure with Rose Metal Wall Art variants

Bright corner with natural lighting, a stylish chair, and a modern metal wall art of a woman's form with a floral design.

Close-up of a black powder-coated wall art spacer showing sturdy screws for secure mounting.

Shared size guide showing dimension references and scale comparison for compatible product variants.

Find the size that fits your wall

Measure the width of the furniture or wall you are decorating, then use the guide below or the size finder in the buy panel.

Above a sofaabout two-thirds of the sofa width
Above a bedabout two-thirds of the bed width
Empty walljust over half the wall width
Hallway or narrow wallabout half the wall width
Office wallaround 60 percent of the width behind the desk

Dimensions shown as W × H. Guidance, not a rule: every size stays selectable.

What makes metal wall art different

A dimensional object, not a printed surface. The cut itself casts shadow and depth that shift with the light in your room.

Dimensional cut-metal silhouette Laser-cut edges hold crisp detail and cast real shadow that shifts with the light in your room.

Powder-coated galvanized metal An electrostatic powder-coat bonds the finish to the galvanized metal for even color with no brush marks.

Rust-resistant finish Made for indoor walls, and also suits covered outdoor spots such as porches, patios, and balconies.

Easy-care surface Wipe clean with a soft dry or microfiber cloth. Use a mild non-abrasive cleaner for sticky spots.

Simple wall installation

Mounting screws and wall anchors are included. All you add is a basic drill, a level, and a pencil.

1 Mark with a level Position the mounting points on the wall and mark them level. Taping the outline first helps preview the size.

2 Drill, anchor, screw Drill pilot holes, insert the included wall anchors, and drive the screws. Choose anchors rated for your wall material and the artwork's loaded weight.

3 Hang on the screws Set the artwork onto the screws, check it with the level, and you are done.

How does it mount? Wall-mounted: it hangs on screws set into anchored pilot holes.

Is hardware included? Yes. Mounting screws and wall anchors come in the box.

What tools do I need? A basic drill, a level, and a pencil.

Details & specifications

Key product information, care notes, and full specifications.

About this piece

Nu adds a laser-cut metal focal point for living rooms, offices, and gallery walls, with a cleaner presence than a flat print. Nu Metal Wall Decor from Grandmix is a laser-cut powder-coated galvanized metal piece featuring a stylized female silhouette with botanical accents, lifted off the wall by a 1.5 cm standoff that casts a soft shadow behind the design. Available in 5 sizes from 18×15 inch (46×38 cm) to 47×39 inch (119×100 cm), in Black or White powder-coated finish, suitable for indoor or outdoor placement.

Why It Works

3D shadow effect via 1.5 cm wall standoff: Unlike flat printed canvas or framed prints that sit flush against the wall, integrated spacers lift the piece off the wall, so ambient light casts a layered shadow that reads as architectural metalwork rather than mass-market wall art.
Laser-cut from 1.5 mm powder-coated galvanized metal: Precision-cut figure and botanical lines hold fine detail (face profile, flower stem, leaf veins) that flat printed art cannot match in physical depth; the galvanized substrate plus electrostatic powder-coat is rust-resistant under typical outdoor conditions, suitable for both indoor walls and exterior placement.
5 sizes scale from solo accent to feature wall: Smaller 18-24 inch pieces work as solo accents above shelves or desks; 32-39 inch suits sofa walls and bedroom focal walls; the 47-inch size suits larger walls or open-plan living rooms.
Designed in-house at Grandmix's Türkiye studio: Drawn and prototyped for considered craftsmanship and a more intentional wall presence.

Specifications

Material

Powder-coated galvanized metal, rust-resistant finish

Finishes

Black, White

Sizes

5 sizes, shown as W × H 18 × 15 in to 47 × 39 in 46 × 38 cm to 119 × 100 cm

See full size list

18 × 15 in · 46 × 38 cm
24 × 20 in · 61 × 51 cm
32 × 27 in · 81 × 68 cm
39 × 33 in · 99 × 83 cm
47 × 39 in · 119 × 100 cm

Mounting

Wall-mounted, hangs on the included screws

Hardware

Mounting screws and wall anchors in the box

Use

Indoor walls; covered outdoor spots such as a porch or patio

Care

Soft dry or microfiber cloth

Origin

Designed by Grandmix, finished and checked before shipping

What's included

Nu Metal Wall Decor piece
Integrated spacer hardware (pre-installed for 3D wall standoff)
Keyhole brackets (pre-installed on the back)
Wall anchors and mounting screws
Care instructions

Care and placement

Designed primarily for indoor walls. Covered outdoor placement such as a porch, patio, or balcony is suitable; avoid direct rain or exposed outdoor placement. Wipe with a soft dry or microfiber cloth, and use a mild non-abrasive cleaner only for sticky spots.

Before you decide

Which size should I choose?

A common rule is about two-thirds of your sofa or bed width. The size finder in the buy panel applies it for you and suggests the closest available size. Dimensions are shown as W × H.

Can I use it outdoors?

Designed primarily for indoor walls. Covered outdoor placement such as a porch, patio, or balcony is suitable. Avoid direct rain or exposed outdoor placement.

How is it installed?

Mounting screws and wall anchors are included. Mark the wall with a level, drill pilot holes, insert anchors, and hang the piece on the screws. Choose anchors rated for your wall material and the artwork's loaded weight.

How long does shipping take?

Orders typically process in 1–3 business days. Estimated delivery is 5–10 business days after processing. Standard shipping is free to the United States, the United Kingdom, European countries, and Canada. Terms and customs fees may vary by destination.

What if it arrives damaged?

If your item arrives damaged or defective, contact customer support within 1–3 business days with photos. Grandmix can help arrange a replacement or full refund based on the policy.

Can I return it?

Yes. Undamaged items can be returned within 30 days. Return shipping or customs fees may apply depending on the destination.

Is mounting hardware included?

Yes. Mounting screws and wall anchors are included in the box. Choose anchors rated for your wall material and the loaded weight.

How do I clean it?

Wipe with a soft dry or microfiber cloth. For sticky spots, use a mild non-abrasive cleaner.