Bathroom Shelf and Towel Holder gives bathrooms, powder rooms, and guest suites a cleaner place for towels and daily essentials. The Bathroom Shelf and Towel Holder from Grandmix combines a wood-plank shelf with a hanging bar below; pick from 3 frame finishes (Black, White, Gold) and 4 wood-plank colors (Pine, Anthracite, Black, White). Available in 12 frame-and-plank combinations.

Why It Works

• 12 finish-and-plank combinations: Three frame finishes × four wood-plank colors give 12 combinations — pair a Black frame with Pine plank for warm contrast, a White frame with White plank for monochrome, or a Gold frame with Anthracite for high-end mix.
• Compact 18-inch single shelf + bar: The 18-inch-wide shelf accommodates a styled tray, plant, or rolled hand towel; the bar below hangs a hand or face towel — keeps a powder room functional in a tight wall span.
• Wood-plank shelf adds warmth: The natural-wood plank breaks up the cold reading of metal-only racks — pairs well with marble, stone, terrazzo, or matte-painted bathroom walls.
• Checked before packing: Edges, coating, and hardware fit are reviewed before shipment so the product arrives ready for standard home installation.

Key Specs

• Dimensions: Approx 8 in / 20 cm H × 18 in / 45 cm W × 8 in / 20 cm D — wall-mounted single shelf with hanging bar below; wood-plank shelf in 4 colors (Pine, Anthracite, Black, White).
• Capacity: 1 wood-plank shelf with hanging bar — decor or rolled towel above, hand or face towel below
• Material: Powder-coated steel frame with wood-plank shelf
• Finishes: Black frame, White frame, Gold frame
• Weight: About 1.2 kg / 2.6 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Bathroom, ensuite, powder room, master bath

What's Included

• Wall-mounted bathroom shelf with hanging bar (frame and plank as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two top mounting hole positions on the wall using a level — the unit has integrated wall-mount keyholes on the back of the shelf bracket. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the unit on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; rinse off any salt-spray promptly.

Frequently Asked Questions

What does it hold?
Top shelf for a small plant, candle, decorative tray, or rolled hand towel; lower bar for a hand or face towel. The 18-inch shelf width is sized for compact decor and hand towels rather than full bath-towel storage.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in a humid bathroom?
Yes. The powder-coated steel finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do the frame finish and wood-plank color combine?
Three frame finishes (Black, White, Gold) pair with four wood-plank colors (Pine, Anthracite, Black, White) for 12 combinations. Pair Black-frame with Pine plank for warm Scandinavian contrast; White-frame with White plank for clean monochrome; Gold-frame with Anthracite for high-end transitional decor. Pick the combination by your bathroom palette.

How do I clean the towel rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page