Tree Shaped Coat Rack adds functional wall storage for entryways, mudrooms, and hallway walls while keeping the design decorative. The Tree Shaped Coat Rack from Grandmix is a wall-mounted vertical silhouette of a leafless tree — branches act as 6, 8, or 10 hooks depending on size, while the slim profile keeps the floor entirely clear. Available in 3 finishes (Black, White, Gold).

Why It Works

• Vertical tree silhouette doubles as wall art: Unlike basic horizontal hook strips that read as pure storage, the leafless-tree silhouette reads first as decor — a focal piece above an entryway bench or beside a console table — and second as functional hooks.
• Slim 0.7-inch wall standoff stays out of walkways: The narrow profile sits close to the wall, so coats and jackets project the depth, not the rack itself — useful in apartment hallways and tight foyers where every inch of clearance matters.
• Three heights for different households: 24-inch (6 hooks), 32-inch (8 hooks), or 40-inch (10 hooks) — pick the size that matches household coat volume without overkill or undersizing for a busy family entryway.
• Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first.

Key Specs

• Dimensions: Three sizes: 24 in / 60 cm H × 6 in / 15 cm W (6 hooks); 32 in / 80 cm H × 6 in / 15 cm W (8 hooks); 40 in / 100 cm H × 6 in / 15 cm W (10 hooks). Stands 0.7 in / 1.7 cm from the wall.
• Capacity: 6, 8, or 10 hooks depending on size — coats, jackets, hats, scarves, bags
• Material: 20 × 20 mm and 15 × 15 mm metal pipe, electrostatic powder-coated steel
• Finishes: Black, White, Gold
• Weight: About 2 kg / 4.4 lb (Size 1)
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Entryway, hallway, foyer, mudroom, bedroom

What's Included

• Wall-mounted tree-shaped coat rack (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two top mounting hole positions on the wall using a level — the rack ships with two integrated wall-mount holes at the top of the trunk silhouette. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws via the back-mounted brackets. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many coats and bags does it hold?
The rack offers 6, 8, or 10 hook positions depending on size selected. Each branch hook comfortably holds a coat, jacket, scarf, or bag; lighter items like hats or umbrellas can share a single branch. Distribute heavier coats across multiple branches for balanced load.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated steel finish handles standard indoor humidity well — entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and luxury or transitional decor. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page