Custom Car Logo gives garages, workshops, and car-themed rooms a sharper visual anchor through cut metal, shadow, and a clean finish. The Custom Car Logo wall art from Grandmix is a laser-cut customizable car-emblem composition in galvanized steel — your chosen car-brand emblem laser-cut from steel rather than printed as a removable overlay. Available in 5 square sizes in a Black finish.

Why It Works

• Customizable car-brand emblem: Your chosen car-brand emblem (Porsche, BMW, Ferrari, Mercedes, Audi, and others) is laser-cut into the metal during fabrication — the personalization is part of the steel, not a printed sticker that can wear off.
• Square format suits gallery walls: Square proportion suits gallery-wall pairings or single-statement placement above a workbench, garage console, or automotive-themed home-office feature wall.
• Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, detached-garage exposure, and covered outdoor walls — sheds water on covered patios.
• Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above.

Key Specs

• Dimensions: Five sizes (H × W): 18 x 18 in / 46 x 46 cm; 24 x 24 in / 61 x 61 cm; 32 x 32 in / 81 x 81 cm; 39 x 39 in / 99 x 99 cm; 47 x 47 in / 119 x 119 cm.
• Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
• Finish: Black
• Weight: From about 1.5 kg / 3.3 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Custom Car Logo (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Home garage feature walls, man-cave decor, automotive workshops, car-themed home offices, and entryway accents all suit this design. The piece works as a single statement above a workbench, tool chest, or shelving unit, especially in spaces styled around vintage automotive prints, model cars, or garage memorabilia.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors and pairs especially well with industrial or contemporary palettes. Match the wall art to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page