Metal Daisy gives living rooms, bedrooms, and covered outdoor walls a sharper visual anchor through cut metal, shadow, and a clean finish. The Metal Daisy Wall Art from Grandmix is a laser-cut daisy silhouette in powder-coated galvanized metal. Petal cutouts cast shadows for visual depth, reading as modern botanical sculpture rather than country-kitchen kitsch. Available in 5 sizes across Black and White finishes.

Why It Works

• Modern botanical instead of country kitsch: The geometric petal cutouts read clean and contemporary, pairing with modern, Scandinavian, and minimalist interiors instead of farmhouse aesthetics.
• Square format suits any wall arrangement: 1:1 proportion works above a console, in a 2×2 gallery wall grid, or as a single statement piece.
• Five sizes for any wall span: 18-inch fits a kitchen breakfast nook accent; 47-inch carries a feature wall in a sunroom or open dining space.
• Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first.

Key Specs

• Dimensions: Five sizes (H × W): 18 x 18 in / 46 x 46 cm; 24 x 24 in / 61 x 61 cm; 32 x 32 in / 81 x 81 cm; 39 x 39 in / 99 x 99 cm; 47 x 47 in / 119 x 119 cm.
• Material: Powder-coated galvanized metal with electrostatic powder-coat finish (rust-resistant)
• Finishes: Black, White
• Weight: From about 1.5 kg / 3.3 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Metal Daisy Wall Art (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain. The rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Living room feature walls, bedroom statement pieces, hallway galleries, dining room accents, home office walls, and entryway focal points all suit this design. The piece works as a single statement above a sofa, console, or bed, or paired with smaller decor elements as part of a curated gallery wall arrangement.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight: drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable. Powder-coated galvanized metal with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look, especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated metal with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page