Lexus GS 350 RWD 2008 Car Silhouette turns open wall space in garages, workshops, and car-themed rooms into a defined metal silhouette. The Lexus GS 350 RWD 2008 Car Silhouette from Grandmix is a laser-cut 2008 Lexus GS 350 RWD side-profile silhouette in powder-coated galvanized metal, long banner proportion designed for above-workbench, over-doorway, and garage feature-wall installations. Available in 7 sizes across Black and White finishes.

Why It Works

• 2008 Lexus GS 350 RWD side-profile in cut powder-coated galvanized metal: The 2008 Lexus GS 350 RWD silhouette is precision-cut from powder-coated galvanized metal, clean lines, no rough edges, instantly recognizable to enthusiasts and casual visitors alike.
• Long banner proportion suits garage walls: Slim horizontal ratio fits above garage doors, workbenches, tool chests, and in narrow stairwell or hallway strips where square art looks cramped.
• powder-coated galvanized metal + powder-coat: Rust-resistant finish handles indoor humidity, detached-garage exposure, and covered outdoor walls, sheds water on covered patios.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Seven sizes (H × W): 18 x 5 in / 46 x 11 cm; 24 x 6 in / 61 x 15 cm; 32 x 8 in / 81 x 20 cm; 39 x 10 in / 99 x 25 cm; 47 x 12 in / 119 x 30 cm; 71 x 18 in / 180 x 45 cm; 95 x 24 in / 241 x 60 cm.
• Material: powder-coated galvanized metal with electrostatic powder-coat finish (rust-resistant)
• Finishes: Black, White
• Weight: From about 1 kg / 2.2 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Lexus GS 350 RWD 2008 Car Silhouette (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain, the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Home garage feature walls, man-cave decor, automotive workshops, car-themed home offices, and entryway accents all suit this design. The piece works as a single statement above a workbench, tool chest, or shelving unit, especially in spaces styled around vintage automotive prints, model cars, or garage memorabilia.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight, drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable, powder-coated galvanized metal with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look, especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated galvanized metal with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page