
Wall Mounted Toilet Paper Holder
A vertical holder stacking four to five spare rolls above the in-use roll at the bottom.
Price depends on the size you choose
Finish: Black
- Height
- 17.7 in
- Width
- 4.7 in
- Depth
- 5.9 in
- Free shipping to US, CA, EU & GB
- 30-day returns
- 24/7 Customer Service
FIT
Sized to your wall
Diagram labelled in inches
Overall
Approx. H 17.7 × W 4.7 × D 5.9 in
Approx. H 45 × W 12 × D 15 cm
Holds
1 in-use roll on the bottom slot + 4-5 reserve rolls stacked vertically above
IN USE
About this piece
This piece adds practical bathroom storage in a compact, finished profile. The Wall Mounted Toilet Paper Holder from Grandmix is a vertical wall-mounted holder that stacks 4-5 spare rolls vertically with the in-use roll at the bottom, keeping a week-plus supply within reach in a slim wall footprint. 7 in / 45 cm H × 4.7 in / 12 cm W × 5.9 in / 15 cm D.
Why It Works
- Vertical reserve-roll stack frees floor and counter: Unlike floor stands or tank-top stacks, vertical wall storage keeps 4-5 rolls within reach without occupying floor space, useful in narrow water closets where every inch of floor matters.
- Bottom slot for the in-use roll, top stack for reserves: Unlike multi-fixture setups (basic holder plus separate spare-roll basket), this single piece covers both functions: load the bottom from above and rotate spares down naturally.
- Powder-coated galvanized metal handles bathroom humidity: Unlike unfinished bare metal that can show humidity spots in poorly ventilated bathrooms, the electrostatic powder-coat finish stays uniform under typical bathroom moisture exposure when wiped dry after heavy splash.
- Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.
MATERIAL & FINISH
Material and finish
1.5 mm cold-rolled powder-coated galvanized metal, electrostatic powder-coated
MOUNTING & PLACEMENT
Wall-mounted
Fixing to the wall
Anchors are not interchangeable. Match them to your own wall material and to the weight the piece will carry once loaded.
Use and installation
Mark the mounting hole positions on the wall using a level.
Drill pilot holes (use a tile-specific carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws.
Hang the unit on the screws via the back-mounted brackets.
Load reserve rolls from the top; the in-use roll sits at the bottom slot.
PRODUCT DETAILS
Product details
Specifications
- Weight
- About 1.2 kg / 2.6 lb
- Indoor bathroom use
- Designed for indoor bathroom placement (powder rooms, primary bathrooms, guest bathrooms). Install outside direct shower-spray zones; wipe dry after heavy moisture exposure.
- Origin
- Designed by Grandmix.
- Assembly
- Basic tools
In the box
- Wall-mounted vertical toilet paper holder (assembled, finish as ordered)
- Mounting screws and wall anchors
- Care instructions
- Care
- Wipe powder-coated galvanized metal with soft, dry cloth. Avoid abrasive cleaners or chemical solvents on the finish.
Questions
Is the powder-coat finish safe for humid bathrooms?
How do I clean the holder?
Frequently bought together


REAL CUSTOMERS
Reviews
KEEP BROWSING
