Tree Branch Hanging Rack Decor turns open wall space in living rooms, bedrooms, and covered outdoor walls into a defined metal silhouette. The Tree Branch Hanging Rack Decor from Grandmix laser-cuts a horizontal branching limb with hooks integrated along its length. Available in 2 finishes (Black, White) across 5 sizes from 18 in / 46 cm to 47 in / 119 cm wide.

Why It Works

• Horizontal branch silhouette reads as natural decor: Unlike straight hook strips, the organic asymmetric branch shape reads as a piece of nature on the wall, fits entryways inspired by Scandinavian, Japandi, modern naturalist, or biophilic interiors.
• Slim 5- to 12-inch height stays under shelves: The narrow horizontal proportions fit under entryway mirrors, picture rails, or shelving without competing for vertical wall space.
• Five sizes from accent to full entryway: The 18-inch suits a hallway corner or near a side door; the 47-inch dominates a feature foyer wall, pick by the wall span, not just by hooks.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: Five sizes (W × H): 18 × 5 in / 46 × 11 cm; 24 × 6 in / 61 × 15 cm; 32 × 8 in / 81 × 20 cm; 39 × 10 in / 99 × 25 cm; 47 × 12 in / 119 × 30 cm. Stands 0.6 in / 1.5 cm from the wall.
• Capacity: 3 to 6 hooks depending on size, coats, scarves, hats, keys
• Material: 1.5 mm laser-cut powder-coated galvanized metal, electrostatic powder-coated
• Finishes: Black, White
• Weight: From about 0.5 kg / 1.1 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Entryway, hallway, mudroom, sunroom, modern naturalist interior

What's Included

• Wall-mounted tree-branch hanging rack (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two mounting hole positions on the wall using a level, the rack has integrated keyhole openings at the back. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many items does each size hold?
3 hooks (18-inch and 24-inch), 4 hooks (32-inch), 5 hooks (39-inch), or 6 hooks (47-inch). Each hook integrates into the branch, works well for coats, scarves, hats, and keys; also doubles as a small wall-art piece holding nothing.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated galvanized metal finish handles standard indoor humidity well, entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes, both finishes pair well across entryways, mudrooms, and bedrooms. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page