TEAMWORK People turns open wall space in living rooms, offices, and gallery walls into a defined metal silhouette. The TEAMWORK People Metal Wall Art from Grandmix is a laser-cut TEAMWORK-typography-with-figure-silhouettes composition in galvanized steel — collaborative-figure cutwork rendered with bold lettering and small people interacting with the letters that reads as graphic design rather than printed paper poster. Available in 5 sizes in a Black finish.

Why It Works

• TEAMWORK typography with figures composition: Laser-cut bold TEAMWORK lettering with small figure silhouettes interacting with the letters — graphic, modern, and reads beautifully above a conference-room console, open-plan-office feature wall, or coworking-space lobby.
• Five sizes from accent to massive feature wall: From 18-inch accent to 47-inch oversized — pick by wall width above a desk, conference table, or open-plan-office feature wall.
• Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, conference-room placement, and covered outdoor walls — direct rain on a covered porch is acceptable.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Five sizes (H × W): 18 x 11 in / 46 x 28 cm; 24 x 14 in / 61 x 36 cm; 31 x 19 in / 79 x 48 cm; 39 x 24 in / 99 x 61 cm; 47 x 29 in / 119 x 74 cm.
• Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
• Finish: Black
• Weight: From about 1 kg / 2.2 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• TEAMWORK People Metal Wall Art (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Home offices, corporate office walls, conference room accents, study walls, coworking-space lobbies, and entrepreneur-themed living-room feature walls all suit this design. The piece works as a single statement above a desk, console, or shared meeting table for a focused, professional ambience.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors and pairs especially well with industrial or contemporary palettes. Match the wall art to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page