Toilet Paper Holder and Storage gives bathrooms, powder rooms, and guest suites a cleaner place for towels and daily essentials. The Toilet Paper Holder and Storage from Grandmix is a freestanding stand that combines an upper toilet paper roll holder with an integrated lower storage section for 3-4 reserve rolls. Available in 3 finishes (Black, White, Gold) at Approximately 28.3 in / 72 cm H × 6.3 in / 16 cm W × 5.5 in / 14 cm D.

Why It Works

• Integrated reserve roll storage at toilet-side reach: Unlike basic single-roll holders that send you under the sink for a fresh roll, the lower storage section keeps 3-4 reserve rolls within seated reach, several spare rolls within arm's reach for typical household use.
• Freestanding with 4 kg base for stability: The heavy powder-coated galvanized metal base helps keep the unit stable on tile, wood, or stone floors without drilling, ideal for rentals or any bathroom where preserving wall integrity matters.
• powder-coated galvanized metal handles bathroom humidity: Unlike unfinished bare metal that can show humidity spots in poorly ventilated bathrooms, the electrostatic powder-coat finish stays uniform under typical bathroom moisture exposure when wiped dry after heavy splash.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: Approximately 28.3 in / 72 cm H × 6.3 in / 16 cm W × 5.5 in / 14 cm D
• Capacity: 1 in-use roll on the upper holder bar + 3-4 reserve rolls in the integrated lower storage section
• Material: 5 mm powder-coated galvanized metal base + 15 × 15 mm metal pipe + integrated storage section, electrostatic powder-coated
• Finishes: Black, White, Gold
• Weight: About 4 kg / 8.8 lb
• Mounting: Free-standing on a flat floor (no drilling)
• Best placement: Beside the toilet, primary bathrooms, guest bathrooms where reserve roll access matters

What's Included

• Freestanding toilet paper holder with reserve storage (assembled, finish as ordered)
• Care instructions

How to Use and Install

Place the stand on a flat floor surface beside the toilet. The weighted powder-coated galvanized metal base helps keep the unit stable in place, no drilling, no wall anchors, no assembly required. Stack reserve rolls in the lower storage section; load the in-use roll on the upper holder bar. Reposition easily as bathroom layout changes.

Care

Wipe the metal frame with a soft, dry cloth to remove dust and incidental humidity. For deeper cleaning, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; place outside direct shower-spray zones and wipe dry after heavy moisture exposure.

Frequently Asked Questions

How many rolls fit in the storage section?
The lower storage section comfortably holds 3-4 standard double or mega rolls, depending on roll diameter. Single rolls fit more compactly; mega rolls may stack 3 deep. Combined with the in-use roll on top, you have several spare rolls within arm's reach.

Does this need to be drilled into the wall or floor?
No. The 4 kg weighted powder-coated galvanized metal base helps keep the stand stable on any flat floor, no anchors, no adhesive, no wall fixings. Renter-friendly, easy to reposition, and ideal for tiled bathrooms where drilling risks cracking grout.

Is the powder-coat finish safe for humid bathrooms?
Yes. The powder-coated galvanized metal finish handles typical bathroom humidity well; for best longevity, place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do I match the finish to existing bathroom hardware?
Black works with matte-black, chrome, and modern monochrome fixtures; White suits Scandinavian, neutral, and minimalist bathrooms; Gold complements warm metallic faucets, antique brass hardware, and luxury or transitional styles. For the most cohesive look, match the stand finish to the faucet, towel bar, or cabinet pull in your bathroom.

How do I clean the holder?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots or product residue, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page