Towel Holder and Shelf for Bathroom adds practical bathroom storage in a compact, finished profile. The Towel Holder and Shelf for Bathroom from Grandmix is a slim 5-inch-tall wood-plank shelf with an integrated hanging bar below. Available in 3 finishes (Black, White, Gold) in 2 sizes.

Why It Works

• Compact dual-function unit: Top shelf for a small plant, candle, or rolled hand towel; bottom bar for a hanging hand towel, keeping a powder room or vanity styled and functional in a 14 to 16-inch wall span.
• Wood-plank shelf adds warmth: The natural wood top breaks up the metal-frame look and pairs well with stone tile, marble, or matte-painted bathroom walls.
• Two sizes for compact spaces: 14-inch suits a powder room or narrow wall beside a sink; 16-inch fits a guest bath or master vanity wall. Pick by available wall span.
• Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.

Key Specs

• Dimensions: Two sizes (H × W × D): 5 × 14 × 6 in / 12.5 × 35 × 15 cm; 5 × 16 × 6 in / 12.5 × 40 × 15 cm.
• Capacity: 1 wood-plank shelf with hanging bar below; small decor or rolled towel above, hand towel below
• Material: Powder-coated metal frame with wood-plank shelf
• Finishes: Black, White, Gold
• Weight: About 1 kg / 2.2 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Powder room, guest bath, master vanity, kitchen prep area

What's Included

• Wall-mounted towel holder with shelf (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two top mounting hole positions on the wall using a level. The unit has integrated wall-mount keyholes on the back of the shelf bracket. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the unit on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated metal with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; rinse off any salt-spray promptly.

Frequently Asked Questions

What does it hold?
Top shelf for a small plant, candle, rolled hand towel, or decorative tray; lower bar for a folded or rolled hand towel. The unit isn't sized for full bath towels; for bath-towel storage, consider our wider models.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in a humid bathroom?
Yes. The powder-coated metal finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome bathroom fixtures; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic faucets, antique brass hardware, and luxury or transitional decor. Match the towel rack finish to faucet, towel hooks, or cabinet pull for the most cohesive look.

How do I clean the towel rack?
Wipe the powder-coated metal with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page