Dota gives living rooms, offices, and gallery walls a sharper visual anchor through cut metal, shadow, and a clean finish. The Dota Metal Wall Decor from Grandmix is a laser-cut Dota-themed emblem in powder-coated galvanized metal, graphic cutwork that reads as architectural metalwork rather than printed gaming poster. Available in 5 sizes across Black and Red finishes.

Why It Works

• Dota emblem in cut powder-coated galvanized metal: Precision-cut emblem reads instantly to the gaming community, graphic, modern, and durable rather than fade-prone print.
• Square format for modern grid layouts: 1:1 proportion works above a gaming desk, in a 2-piece grid above a streaming chair, or as a single statement on a feature wall.
• powder-coated galvanized metal + powder-coat: Rust-resistant finish handles indoor humidity, gaming-room placement, and covered outdoor walls.
• Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first.

Key Specs

• Dimensions: Five sizes (H × W): 18 x 18 in / 46 x 46 cm; 24 x 24 in / 61 x 61 cm; 32 x 32 in / 81 x 81 cm; 39 x 39 in / 99 x 99 cm; 47 x 47 in / 119 x 119 cm.
• Material: powder-coated galvanized metal with electrostatic powder-coat finish (rust-resistant)
• Finishes: Black, Red
• Weight: From about 1.5 kg / 3.3 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Dota Metal Wall Decor (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain, the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Kids' rooms, teen bedrooms, gaming dens, playrooms, and hobby studios all suit this design. The piece works above a desk, bunk bed, or console-gaming station, especially when paired with neutral wall paint or shiplap that lets the cutout silhouette read clearly across the room.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight, drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable, powder-coated galvanized metal with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; Red works as a bold accent against neutral, white, gray, or wood-toned walls, particularly suited to gaming-room and esports-styling palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look, especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated galvanized metal with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page