Modern Design Metal Shoe Rack keeps entry shoes off the floor while preserving a clean storage profile. The Modern Design Metal Shoe Rack from Grandmix is a wall-mounted 2-tier organizer that reclaims floor space, a clean profile that doubles as entryway decor when no shoes are loaded. Available in 3 finishes (Black, White, Gold) with a single 28-inch width designed for typical hallway and entryway placement.

Why It Works

• Wall-mounted reclaims entryway floor space: Unlike free-standing racks that occupy a square foot of valuable entry floor, the wall-mounted profile keeps the floor clear for walking, vacuuming, and foot traffic, useful in narrow hallways, apartment foyers, or compact mudrooms.
• Open 2-tier design lets wet shoes dry: Unlike closed cubbies that trap moisture and odor, the open metal tiers let air circulate around shoes, practical for daily indoor pairs, wet shoes after rainy days, and the occasional gym shoe.
• Modern profile reads as decor when empty: Unlike utility shoe racks that look industrial when no shoes are loaded, the clean rectangular silhouette functions as a wall accent in its own right, the rack stays decorative even between uses.
• Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first.

Key Specs

• Dimensions: 7" H × 28" W × 10" D (23 × 70 × 25 cm)
• Capacity: About 6 pairs across 2 tiers (3 per tier, depending on shoe size)
• Material: 15 × 15 mm powder-coated metal pipe, welded, electrostatic powder-coated
• Finishes: Black, White, Gold (Gold finish $10 higher)
• Weight: 4 kg / 8 lb 8 oz
• Mounting: Wall-mounted via integrated keyhole brackets; mounting screws and anchors are included, use anchors rated for your wall material and the loaded weight
• Best placement: Entryway, mudroom, hallway, closet, garage, gym entry

What's Included

• 2-tier wall-mounted shoe rack (assembled, finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Hang and Install

Mark the keyhole spacing on the wall using a level. Drill pilot holes, insert the included wall anchors, and drive the mounting screws in until the screw heads stand slightly proud of the wall. Hang the rack by aligning the back-mounted brackets over the screw heads. Recommended mounting height is 6–10 inches above the floor for the lower tier; the upper tier sits about 9–12 inches above the lower tier. Install takes under 10 minutes with a basic drill.

Care

Wipe the metal frame with a soft, dry cloth to remove dust and incidental dirt. For wet shoe drips on the tiers, dry the surface promptly with a clean cloth. Avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The rack is designed for indoor use, entryways, mudrooms, hallways, closets; for screened porches or covered entries, wipe down after heavy moisture exposure.

Frequently Asked Questions

How many pairs does it hold?
About 6 pairs across the 2 tiers (3 per tier depending on shoe size). Men's sizes 11+ may fit fewer per slot; women's flats and children's shoes can stack more compactly with smaller pairs. The open layout keeps daily pairs visible and easy to grab.

What walls and hardware does it work with?
Mounting screws and anchors are included, but use anchors rated for your wall material and the loaded weight. For tile, plaster, or masonry walls, swap to wall-specific anchors rated for the load. Use the listed shelf or tier count to match the number of pairs you store most often.

Where should I mount it relative to the floor?
The lower tier typically sits 6–10 inches above the floor for easy reach and floor cleaning underneath. The upper tier sits about 9–12 inches above the lower one, which works for flats, sneakers, and most ankle boots; for tall riding boots, mount the rack a bit higher.

Is it suitable for outdoor placement on a covered porch?
The powder-coated finish is designed for indoor use (entryways, mudrooms, hallways, closets). For covered outdoor placements like screened porches, occasional use is acceptable; for direct rain or pool-deck spray, choose covered locations and wipe dry after exposure.

How do I clean the rack frame?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots from shoe rubber or wet drips, a damp cloth with mild non-abrasive detergent works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish.

You can check our Shipping Policy page