Saiyan of Earth Son Goku turns open wall space in media rooms, offices, and hobby spaces into a defined metal silhouette. The Saiyan of Earth Son Goku Metal Wall Art from Grandmix is a laser-cut Goku-style martial-arts-stance silhouette in powder-coated galvanized metal, clean cutwork that reads as graphic design rather than printed paper poster. Available in 9 sizes in a Black finish.

Why It Works

• Goku martial-arts stance silhouette: Laser-cut Saiyan-fighter pose with iconic spiked-hair detail and bold linework, graphic, modern, and instantly recognizable to anime fans.
• Nine sizes for any wall span: From 18-inch accent to 79-inch oversized, pick by wall width above a teen-room desk, gaming-den console, or anime-themed feature wall.
• powder-coated galvanized metal + powder-coat: Rust-resistant finish handles indoor humidity, basement-game-room exposure, and covered outdoor walls, direct rain on a covered porch is acceptable.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: Nine sizes (H × W): 18 x 8 in / 46 x 19 cm; 24 x 10 in / 61 x 25 cm; 32 x 13 in / 81 x 34 cm; 39 x 16 in / 99 x 41 cm; 47 x 20 in / 119 x 50 cm; 55 x 23 in / 140 x 58 cm; 63 x 27 in / 160 x 67 cm; 71 x 30 in / 180 x 75 cm; 79 x 33 in / 201 x 84 cm.
• Material: powder-coated galvanized metal with electrostatic powder-coat finish (rust-resistant)
• Finish: Black
• Weight: From about 1.5 kg / 3.3 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Saiyan of Earth Son Goku Metal Wall Art (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain, the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Anime-fan bedrooms, gaming dens, teen rooms, hobby studios, and home theater walls all suit this design. The piece works above a desk, console-gaming station, or media unit, especially when paired with neutral wall paint or shiplap that lets the cutout silhouette read clearly.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight, drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable, powder-coated galvanized metal with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors and pairs especially well with industrial or contemporary palettes. Match the wall art to nearby furniture, hardware, or decor accents for the most cohesive look, especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated galvanized metal with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page