The Wall Mounted Firewood Rack is a floor-clearing metal log holder for fireplace walls, garages, cabins, and tight hearth areas. It lifts a modest firewood stack off the floor, which can help keep the area clearer for tools, walking space, or routine cleaning.

Made from powder-coated galvanized metal, the rack is rust-resistant and water-resistant for indoor rooms, covered patios, garages, and outdoor fireplace areas. Because mounted storage carries wood weight through the wall, use hardware and installation guidance appropriate for the wall type. For related mounted designs, see Wall-Mounted Firewood Racks.

Why It Works

• Frees up hearth floor entirely: Wall mounting clears the floor for fireplace tools, log carrier, or walkway, useful in narrow apartments, hallway-style rooms, and rentals where every square foot of floor matters.
• Four sizes from compact to multi-tier: 20-inch fits a small living-room wall above the fireplace tools; 36 × 14 × 12 holds enough logs for several evening fires. Pick by available wall span and visible weight load.
• Slim profile sits close to the wall: 8-inch depth keeps the rack from projecting into the room. Split logs project outward into the visible space, while the rack itself stays out of the way.
• Checked before packing: Edges, coating, and hardware fit are reviewed before shipment so the product arrives ready for standard home installation.

Key Specs

• Dimensions: Four sizes (H × W × D): 20 × 8 × 8 in / 50 × 20 × 20 cm; 24 × 8 × 8 in / 60 × 20 × 20 cm; 28 × 8 × 8 in / 70 × 20 × 20 cm; 36 × 14 × 12 in / 90 × 35 × 30 cm.
• Capacity: Standard fireplace-cut split logs; the largest size accommodates approximately 12-18 split logs
• Material: powder-coated galvanized metal, slim wall-mount frame
• Finishes: Black, White, Gold
• Weight: From about 2 kg / 4.4 lb at the smallest size (rack only; loaded weight depends on logs)
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded log weight.
• Placement: Living room hearth wall, fireplace alcove, mudroom wall, family room

What's Included

• Wall-mounted firewood rack (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two upper mounting hole positions on the wall using a level. The rack ships with two integrated wall-mount keyholes at the back of the frame. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws via the back-mounted brackets. Install takes under 15 minutes with a basic drill.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor use next to the fireplace; for covered porch installations, rinse off any salt-spray and wipe dry. The powder-coated galvanized metal finish is rust-resistant and water-resistant for indoor rooms, garages, covered patios, and outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

Frequently Asked Questions

How many logs does it hold?
Designed for fireplace-cut split logs 12 to 16 inches long. The 20-inch unit holds 4 to 6 logs; the 28-inch holds 8 to 12; the 36 x 14 x 12 holds 12 to 18 split logs depending on diameter. Distribute weight along the rack length.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded log weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it support a full load of split firewood?
The wall-mount brackets transfer load to the wall studs or anchors. Use heavy-duty anchors rated for the loaded log weight you plan to carry; a typical full load runs 25 to 60 pounds depending on size. Anchor into a wall stud where possible for stronger pull-out resistance, especially on larger sizes.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and warm metallic or transitional decor. Match the firewood rack finish to fireplace tools, fender legs, or hearth accessories for the most cohesive look.

How do I clean the firewood rack?
Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page