Wall Mounted Slipper Rack with Wooden Front for Compact Storage gives entryways, closets, and mudrooms a more defined place for everyday footwear. The Wall Mounted Slipper Rack with Wooden Front from Grandmix mounts at shin-height to keep slippers off the floor entirely, wood-and-metal design reads as decor, not storage. Available in 3 finishes (Black, White, Gold) at Approximately 7 in / 17 cm H × 16 in / 40 cm W × 3.5 in / 9 cm D.

Why It Works

• Wall-mounted reclaims floor space: Unlike floor racks that occupy walking paths in narrow entryways, the wall-mounted design lifts slippers entirely off the floor, no tripping, easier vacuuming, more space for foot traffic.
• Wooden front softens entryway aesthetics: The wood panel front mixes warmth with the metal frame, fits decor-conscious entryways and apartments where wall-mounted storage shouldn't look industrial.
• Slim 3.5-inch depth profile: Sits flush against the wall, minimal protrusion into the entryway, easier to walk past without bumping a hip or shoulder.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Approximately 7 in / 17 cm H × 16 in / 40 cm W × 3.5 in / 9 cm D
• Capacity: 3 pairs of standard adult slippers
• Material: 15 × 15 mm metal pipe + wooden front panel, electrostatic powder-coated
• Finishes: Black, White, Gold
• Weight: About 3 kg / 6.6 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Narrow entryways, mudrooms, apartment hallways where floor space matters

What's Included

• Wall-mounted slipper rack with wood front panel (assembled, finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting hole positions on the wall using a level; recommended mounting height is 8-10 inches above the floor. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws via the back-mounted brackets. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated frame with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure.

Frequently Asked Questions

How many slipper pairs does it hold?
The rack comfortably holds 3 pairs of standard adult slippers in a single linear row behind the wood front panel. House slippers, slip-ons, and flat-soled indoor shoes all fit; bulkier outdoor sneakers may not slide cleanly into the slim slot profile.

How does it mount to the wall?
Mounting screws and anchors are included for drywall installations. For tile, plaster, or masonry walls, swap to wall-specific anchors rated for the rack's loaded weight; use a tile-specific drill bit (carbide-tipped) at low speed for tile. Recommended mounting height: 8-10 inches above the floor.

What height should I mount it at?
Recommended mounting height is 8-10 inches above the floor, placing the slipper opening at shin level for easy slide-in use while standing. Mount slightly lower for kids' slippers, or slightly higher for tall adults and entryways with nearby stairs.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and luxury or transitional decor. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page