US Veteran Independence Day Gift adds a laser-cut metal focal point for living rooms, offices, and gallery walls, with a cleaner presence than a flat print. The US Veteran Independence Day Gift Metal Wall Art from Grandmix is a laser-cut eagle-flag-helmet-saluting-soldier composition in powder-coated galvanized metal, military-tribute cutwork rendered with bold figure-and-emblem detail that reads as graphic design rather than printed reproduction. Available in 5 sizes across Black and White finishes.

Why It Works

• Eagle, flag, helmet, soldier composition: Laser-cut bald eagle paired with American flag, military helmet, and saluting soldier silhouette, graphic, modern, and reads beautifully above a veteran-tribute console, study, or patriotic feature wall.
• Five square sizes for gallery walls: From 18-inch accent to 47-inch oversized square, square format suits gallery-wall pairings or single-statement placement above a console, mantel, or study desk.
• powder-coated galvanized metal + powder-coat: Rust-resistant finish handles indoor humidity, study placement, and covered outdoor walls, direct rain on a covered porch is acceptable.
• Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.

Key Specs

• Dimensions: Five sizes (H × W): 18 x 18 in / 46 x 46 cm; 24 x 24 in / 61 x 61 cm; 32 x 32 in / 81 x 81 cm; 39 x 39 in / 99 x 99 cm; 47 x 47 in / 119 x 119 cm.
• Material: powder-coated galvanized metal with electrostatic powder-coat finish (rust-resistant)
• Finishes: Black, White
• Weight: From about 1.5 kg / 3.3 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• US Veteran Independence Day Gift Metal Wall Art (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain, the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Living room patriotic-feature walls, home offices, veteran-tribute displays, study walls, bar-and-game-room accents, and front-entry covered porches all suit this design. The piece works as a single statement above a console, mantel, or sofa, especially when paired with framed memorabilia or American-themed accents in the surrounding decor.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight, drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable, powder-coated galvanized metal with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look, especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated galvanized metal with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page