Tall Metal Umbrella Stand with Repeating Umbrella Pattern keeps umbrellas upright near the entry while adding a cleaner metal accent. The Tall Metal Umbrella Stand with Repeating Umbrella Pattern from Grandmix is a slim 6.3-inch deep repeating umbrella pattern metal stand with an enclosed drip tray — designed to sit beside front doors, console tables, or hallway entries. Available in 3 finishes (Black, White, Gold) at a single 24×13.8×6.3 inch (60×35×16 cm) size.

Why It Works

• Slimmest 6.3" depth fits beside front doors: Unlike standard floor-standing umbrella stands that require a clear corner, the slim depth tucks against walls and beside consoles without intruding into walking paths — useful in narrow apartment foyers, hallways, and behind-the-door zones.
• Enclosed bottom drip tray protects floors: Unlike open-bottom or wire-mesh stands that let drips reach the floor, the enclosed bottom catches water from wet umbrellas — helping keep wood floors and entryway rugs drier between rainy days.
• Repeating icon pattern signals purpose: Unlike single-icon or abstract perforation, the repeating umbrella icon pattern reinforces the stand's function across the full 24-inch height — playful and on-theme without crossing into novelty territory.
• Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above.

Key Specs

• Dimensions: 24" H × 13.8" W × 6.3" D (60 × 35 × 16 cm)
• Capacity: 4-6 standard umbrellas, or 8-10 compact/folding umbrellas; also fits walking sticks, canes, and golf umbrellas
• Material: 2 mm cold-rolled steel sheet, laser-cut, electrostatic powder-coated
• Finishes: Black, White, Gold (Gold finish $10 higher)
• Weight: ~3 kg / 6.6 lb; max load ~8 kg / 17.6 lb
• Mounting: Free-standing (place on flat floor; best against a wall for added stability)
• Best placement: Entryway, foyer, hallway, beside front door, office reception

What's Included

• Tall Metal Umbrella Stand with Repeating Umbrella Pattern (assembled, finish as ordered)
• Care instructions

How to Use and Install

The stand ships fully assembled. Place on a flat floor in your entryway, foyer, or hallway. For added stability, position against a wall or in a corner. The 6.3-inch slim depth tucks tightly against the wall; the 13.8-inch width provides a stable base for typical umbrella loads. Shake umbrellas off before placing them in the stand to reduce moisture buildup. No tools, hardware, or assembly steps required.

Care

The powder-coated steel finish is more humidity-resistant than unfinished bare metal and suitable for indoor use; it tolerates covered outdoor placements (porches, balconies, screened entrances). Wipe the bottom drip tray occasionally to prevent standing water buildup. Clean the frame with a soft, dry cloth or a damp cloth with mild non-abrasive detergent. Avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish.

Frequently Asked Questions

How many umbrellas does this stand hold?
4-6 standard umbrellas, or 8-10 compact/folding umbrellas, depending on canopy size. Walking sticks, canes, and golf umbrellas also fit comfortably alongside compact umbrellas. For larger umbrella collections beyond 6 standard pieces, a wider stand may suit better.

Does it have a drainage tray for wet umbrellas?
Yes. The bottom is enclosed to catch drips from wet umbrellas, helping keep wood floors and entryway rugs drier. Wipe the tray occasionally with a soft cloth; for heavy rain days, dump accumulated water before storing dry umbrellas inside again.

Is it stable for tall folding umbrellas?
The 13.8-inch wide base provides a stable footing for typical umbrella loads, including tall folding and standard umbrellas. For best stability with taller or heavier umbrellas, position the stand against a wall — this is recommended for slim-depth stands carrying full loads.

Can I use it outdoors on a covered porch or balcony?
The powder-coated finish is designed for indoor use; it tolerates covered outdoor placements like porches, balconies, and screened entrances. For direct rain or salt-spray exposure, choose covered locations and wipe dry after heavy rain or moisture exposure.

Does it require assembly?
No. The stand ships fully assembled — no tools, hardware, or assembly steps required. Unbox, place on a flat floor near your front door, and start using it immediately. The drip tray is pre-installed and ready for use.

You can check our Shipping Policy page