The Elegant Metal Wood Storage rack is a tiered vertical log holder for fireplaces, cabins, garages, and covered outdoor hearth zones. Its angled shelf layout helps separate logs by size or fire stage, making it easier to grab the right split without disturbing the whole stack.

Built from powder-coated galvanized metal, the rack is rust-resistant and water-resistant; suitable for covered outdoor use as well as indoor rooms and covered outdoor fireplace areas. The tiered frame suits hearths where firewood storage should be visible, organized, and more decorative than a basic utility stand. For related upright options, see Vertical Firewood Racks.

Why It Works

• Three diagonal tiers sort logs by size: Use the upper tier for kindling and small splits, the middle for medium logs, and the bottom for large fireplace logs. Grab what the fire needs without rummaging through a single pile of mixed sizes.
• Mesh back keeps logs contained against the wall: The mesh-back panel holds logs in place even when angled on the diagonal tiers, with no rolling, no sliding off the back edge, and no need to push the rack flush against the wall.
• Tall narrow 12-inch profile fits apartment hearths: Multi-tier vertical storage in a slim 12-inch footprint, useful where horizontal racks block walkways or where a tall single-pile rack feels visually too monolithic.
• Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above.

Key Specs

• Dimensions: One size (H × W × D): 41 × 11.8 × 12.2 in / 104 × 30 × 31 cm.
• Capacity: Three diagonal tier shelves with mesh backing; total capacity approximately 18-25 standard fireplace-cut split logs across all tiers
• Material: powder-coated galvanized metal with mesh-back panel and three diagonal shelf tiers
• Finishes: Black, White, Gold
• Weight: About 6 kg / 13.2 lb
• Mounting: Free-standing, no mounting hardware required; sits flat on the floor or hearth on a flat, level surface.
• Placement: Living room hearth, fireplace nook, family room, sunroom

What's Included

• Free-standing three-tier firewood storage with mesh back (finish as ordered)
• Care instructions

How to Use and Install

Place the unit flat on the floor next to the fireplace or hearth on a level surface. Load the largest split logs at the bottom for a low center of gravity, then stack medium logs above for stability. Distribute weight evenly across the frame and avoid loading heavily on one side. No tools or mounting hardware are required.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor placement next to the fireplace or hearth; covered porch use is acceptable on a flat, level surface, so rinse off any salt-spray and wipe dry. The powder-coated galvanized metal finish is rust-resistant and water-resistant for indoor rooms, garages, covered patios, and outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

Frequently Asked Questions

How many logs does each tier hold?
Designed for fireplace-cut split logs 12 to 16 inches long. Each diagonal tier holds approximately 6 to 9 split logs depending on diameter, for a total of 18 to 25 split logs across all three tiers. Sort logs by size, small in the upper section and large on bottom, for fastest access.

How stable is the multi-tier frame?
The mesh-back panel and welded metal frame add lateral rigidity to the multi-tier structure when placed on a flat, level floor. Distribute weight evenly across the three tiers rather than loading the upper alone. Place against a wall for extra visual stability and so the mesh back rests wall-side.

Why diagonal shelves instead of horizontal?
The diagonal angle uses gravity to hold logs against the mesh back. Split logs lean inward toward the wall instead of needing front rails to stop them rolling forward. Easier to load, easier to grab, and visually adds movement to the multi-tier structure rather than reading as a static bookshelf.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and warm metallic or transitional decor. Match the firewood rack finish to fireplace tools, fender legs, or hearth accessories for the most cohesive look.

How do I clean the firewood rack?
Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page