Hanger with Bird adds functional wall storage for entryways, mudrooms, and hallway walls while keeping the design decorative. The Hanger with Bird from Grandmix is a more compact bird-and-branch composition, single bird figure on a smaller branch span, with hooks integrated below. Available in 2 finishes (Black, White) across 5 sizes from 18 in / 46 cm to 47 in / 119 cm wide.

Why It Works

• Single-bird silhouette reads as quiet decor: Unlike multi-bird tree compositions that fill the wall, the simpler single-bird design works in smaller wall zones, accent corners, narrow hallways, or above doorways where space is limited.
• Vertical proportions clear longer items: The 12 to 31 inch height clears longer coats, dresses, or bags hanging below the hooks without bunching against the wall, useful for entryways with full-length winter coat storage.
• Five sizes from accent to family-scale: The 18-inch suits a single-coat zone; the 47-inch handles a 6-hook family entryway, pick the wall span and hook count to match the actual usage.
• Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first.

Key Specs

• Dimensions: Five sizes (W × H): 18 × 12 in / 46 × 31 cm (3 hooks); 24 × 16 in / 61 × 41 cm (3 hooks); 32 × 21 in / 81 × 54 cm (4 hooks); 39 × 26 in / 99 × 66 cm (5 hooks); 47 × 31 in / 119 × 80 cm (6 hooks). Stands 0.6 in / 1.5 cm from the wall.
• Capacity: 3 to 6 hooks depending on size, coats, jackets, bags, scarves
• Material: 1.5 mm laser-cut powder-coated galvanized metal, electrostatic powder-coated
• Finishes: Black, White
• Weight: From about 0.5 kg / 1.1 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Entryway, hallway, bedroom, garden room, sunroom

What's Included

• Wall-mounted hanger with bird (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two mounting hole positions on the wall using a level, the rack has integrated keyhole openings at the back. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many coats does each size hold?
3 hooks (18-inch and 24-inch), 4 hooks (32-inch), 5 hooks (39-inch), or 6 hooks (47-inch). Each hook comfortably holds a coat, jacket, scarf, or bag. Lighter items like hats can share a hook. Choose the size by hook count and wall span, then use anchors rated for the wall material and expected load.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated galvanized metal finish handles standard indoor humidity well, entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes, both finishes pair well across entryways, mudrooms, and bedrooms. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page