The Metal Wood Rack with Bench is a horizontal firewood rack with an upper wood-plank surface for fireplaces, cabins, garages, and covered outdoor hearth areas. It stores split logs below while giving the hearth a small surface for kindling, matches, or light decor.

The metal frame is made from powder-coated galvanized metal with a rust-resistant and water-resistant finish suitable for indoor rooms and covered outdoor use. This design works well when firewood storage should feel closer to furniture than a utility rack. For related surface-plus-storage models, see Firewood Racks with Tabletop.

Why It Works

• Bench-upper adds usable surface above the log stack: The wood-plank upper doubles as a low bench seat, a fireplace tool tray, or a display surface for decor objects, so log storage doesn't surrender hearth-side surface area.
• Horizontal stacking suits wide-hearth living rooms: 40-inch wide footprint sits along the hearth wall instead of stacking tall, useful in rooms where a vertical rack would block art, mantel sightlines, or windows.
• Wood-plank upper warms up the metal frame: The light-wood bench-upper breaks up the monolithic look of pure metal racks and pairs well with stone, brick, or wallpapered fireplace walls where pure black or pure white can read as too cold.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: One size (H × W × D): 20 × 40 × 12 in / 50 × 100 × 30 cm.
• Capacity: Approximately 18-25 standard fireplace-cut split logs underneath the bench-upper. Horizontal hearth-side storage with double-duty bench surface above.
• Material: powder-coated galvanized metal frame with light wood-plank bench upper
• Finishes: Black, White, Gold
• Weight: About 7 kg / 15.4 lb
• Mounting: Free-standing. No mounting hardware required; sits flat on the floor or hearth on a flat, level surface.
• Placement: Living room hearth, fireplace nook, family room, sunroom

What's Included

• Free-standing metal wood rack with wood-plank bench (finish as ordered)
• Care instructions

How to Use and Install

Place the unit flat on the floor next to the fireplace or hearth on a level surface. Stack split logs underneath the bench-upper, distributing weight evenly across the frame. The wood-plank upper doubles as a low bench seat or display shelf for fireplace tools, log carrier, or decor. No tools or mounting hardware are required.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor placement next to the fireplace or hearth; covered porch use is acceptable on a flat, level surface. Rinse off any salt-spray and wipe dry. The powder-coated galvanized metal finish is rust-resistant and water-resistant for indoor rooms, garages, covered patios, and covered outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

Frequently Asked Questions

How many logs does it hold?
Designed for standard fireplace-cut split logs in the 14 to 18 inch length range. The horizontal under-bench compartment holds approximately 18 to 25 split logs depending on log diameter and how tightly stacked. Load logs perpendicular to the bench-upper length, with the largest splits at the floor for low center of gravity.

Can I sit on the bench-upper?
The wood-plank upper is sized for occasional perching, good for tying shoes, pulling on boots, or staging fireplace tools. It's not engineered as a primary seating bench for prolonged sitting; for everyday seating, pair with proper bench cushions and limit weight to one adult at a time. Distribute weight centrally on the plank.

Does the wood plank need any maintenance?
Wipe the wood-plank upper with a soft, dry cloth or microfiber to remove dust. For sticky spots, a barely-damp cloth with mild non-abrasive cleaner works. Avoid soaking the wood with water and avoid abrasive cleaners. Periodic wood conditioner application (every 6-12 months) keeps the natural-wood appearance fresh in heated rooms.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and warm metallic or transitional decor. Match the firewood rack finish to fireplace tools, fender legs, or hearth accessories for the most cohesive look.

How do I clean the firewood rack?
Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page