The Minimalist Metal Log with Kindling Holder is a low horizontal firewood rack for fireplaces, cabins, garages, and covered outdoor hearth areas. It gives split logs a wide main section while keeping kindling or smaller fire-starting pieces in a separate side area.

Made from powder-coated galvanized metal, the rack is rust-resistant and water-resistant, suitable for indoor rooms and covered outdoor fireplace zones. The lower profile works well when the stack should stay below the mantel line while keeping logs and kindling organized in one frame. For related low hearth-wall options, see Horizontal Firewood Racks.

Why It Works

• Low 18-inch profile preserves mantel sightline: Sits well below the fireplace mantel so it doesn't block art, TV mounting, or decor above the firebox, useful in living rooms where the fireplace wall is the main visual focal point.
• Wide 38-inch frame handles weekend burn cycle: The horizontal stack holds 14-20 split logs across the main section, enough for several evening fires without restocking, plus dedicated kindling on the side.
• Dedicated kindling compartment keeps small twigs accessible: Side compartment holds kindling, fatwood, and fire-starter cubes separately from main logs, so there is no rummaging through firewood to find a fire-starter.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: One size (H × W × D): 18 × 38 × 12 in / 45 × 97 × 30 cm.
• Capacity: Approximately 14-20 standard fireplace-cut split logs in the main section, plus dedicated kindling capacity in the side compartment
• Material: powder-coated galvanized metal, low horizontal frame with kindling section
• Finishes: Black, White, Gold
• Weight: About 5 kg / 11 lb
• Mounting: Free-standing, no mounting hardware required; sits flat on the floor or hearth on a flat, level surface.
• Placement: Living room hearth, fireplace nook, family room, sunroom

What's Included

• Free-standing minimalist log holder with side kindling section (finish as ordered)
• Care instructions

How to Use and Install

Place the unit flat on the floor next to the fireplace or hearth on a level surface. Load split firewood across the upper rack section, distributing weight evenly. Use the lower kindling section for small twigs, kindling, fatwood, or fire-starters. No tools or mounting hardware are required.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor placement next to the fireplace or hearth; covered porch use is acceptable on a flat, level surface. Rinse off any salt-spray and wipe dry. The powder-coated galvanized metal finish is rust-resistant and water-resistant for indoor rooms, garages, covered patios, and covered outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

Frequently Asked Questions

How many logs and how much kindling does it hold?
Designed for standard fireplace-cut split logs in the 14 to 18 inch length range. The main section holds approximately 14 to 20 split logs depending on log diameter; the side compartment holds enough kindling, fatwood, or small twigs for multiple fire starts. Load main logs in the wide section and small kindling on the side.

How stable is it when fully loaded?
The unit sits flat on the floor with a wide base footprint that distributes log weight when used on a flat, level floor. The lower kindling section keeps the center of gravity low when small kindling is loaded there. Distribute split logs evenly across the upper section to avoid lopsided loading.

Can I keep kindling in the side section year-round?
Yes, the side kindling compartment is sized for small twigs, fatwood sticks, and fire-starter cubes. Air circulates around the open compartment so kindling stays dry indoors. For longer-term kindling storage, restock when the section empties to about a third full to avoid ground contact and keep stock visible.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and warm metallic or transitional decor. Match the firewood rack finish to fireplace tools, fender legs, or hearth accessories for the most cohesive look.

How do I clean the firewood rack?
Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page