Silver Finished Multi Functional Towel Rack keeps bathrooms, powder rooms, and guest suites better organized without making the room feel crowded. The Silver Finished Multi Functional Towel Rack from Grandmix is a single-bar wall-mount in 6 widths from 12 to 32 inches, flexible enough for hand towels in a powder room or bath towels in a master suite. Single Silver finish.

Why It Works

• Six widths for any towel layout: 12 to 32 inches in single-bar widths. Fits beside a sink, on a narrow wall between fixtures, or as a full bath-towel bar across a master bathroom.
• Silver finish pairs with chrome fittings: Where Black or Gold can clash with chrome fittings, the silver finish matches brushed chrome or nickel faucets, chrome fixtures, and brushed-nickel hardware, with no finish-mismatch issue.
• Slim 2-inch projection saves walkway clearance: The narrow profile keeps the bar close to the wall, useful in tight bathrooms where every inch of clearance matters between the rack and the opposing wall, vanity, or shower stall.
• Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above.

Key Specs

• Dimensions: Six sizes (W × H × D): 12 × 4 × 2 in / 30 × 10 × 4 cm; 16 × 4 × 2 in / 40 × 10 × 4 cm; 20 × 4 × 2 in / 50 × 10 × 4 cm; 24 × 4 × 2 in / 60 × 10 × 4 cm; 28 × 4 × 2 in / 70 × 10 × 4 cm; 32 × 4 × 2 in / 80 × 10 × 4 cm.
• Capacity: Single horizontal bar, 1 to 3 hand or bath towels depending on size selected
• Material: Powder-coated galvanized metal tube with chrome-style silver finish
• Finish: Silver
• Weight: From about 0.3 kg / 0.7 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Bathroom, kitchen, mudroom, laundry room

What's Included

• Wall-mounted silver-finish single-bar towel rack (size as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two end-mount hole positions on the wall using a level; the bar has wall-mount brackets at each end. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Tighten the bracket setscrews to lock the bar in place. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated metal with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; rinse off any salt-spray promptly.

Frequently Asked Questions

How many towels does each size hold?
12-inch suits a single hand towel; 16-inch holds a hand and a face towel side by side; 20 to 24-inch handles a single folded bath towel comfortably; 28 to 32-inch holds two bath towels or one bath towel and a hand towel together.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in a humid bathroom?
Yes. The powder-coated metal finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How is silver different from satin nickel or chrome?
Silver as used here describes the brushed-silver tone of the powder coating, closer to chrome than to a warm metallic. It pairs well with brushed chrome or nickel faucets, chrome fixtures, and modern fittings; for warmer tones, consider gold from our other towel rack styles.

How do I clean the towel rack?
Wipe the powder-coated metal with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page