Compact Metal Umbrella Stand for Entryway keeps umbrellas upright near the entry while adding a cleaner metal accent. The Compact Metal Umbrella Stand from Grandmix is a free-standing umbrella holder designed for small entryways, apartment foyers, narrow hallways, and tight wall-side spaces. The slim 17.7" H × 7.8" W × 3.9" D (45 × 20 × 10 cm) profile fits where larger floor-standing stands don't. Powder-coated 2 mm steel sheet construction holds 2-4 standard umbrellas (or 4-6 compact/folding umbrellas) in Black, White, or Gold finish.

Why It Works

• Slimmest 3.9" depth: The shallowest profile in our umbrella stand collection — fits next to front doors, narrow consoles, or shoe storage benches without cluttering the entryway.
• Open-frame ventilation: Horizontal slat structure provides airflow around the umbrellas, helping wet umbrellas dry between uses faster than enclosed designs.
• Enclosed bottom drip tray: Catches drips from wet umbrellas, helping keep floors and entryway rugs drier.
• Free-standing, no drilling: Place against a wall or beside a door; no wall mounting or assembly required.

Key Specs

• Dimensions: 17.7" H × 7.8" W × 3.9" D (45 × 20 × 10 cm)
• Capacity: 2-4 standard umbrellas or 4-6 compact/folding umbrellas (also fits walking sticks and canes)
• Material: 2 mm cold-rolled steel sheet, powder-coated; finish in Black, White, or Gold
• Weight: 3 kg / 6.6 lb; max load 8 kg / 17.6 lb
• Mounting: Free-standing (place on a flat floor; best against a wall for added stability)

What's Included

• Compact metal umbrella stand (assembled)
• Care instructions

How to Use and Install

The stand ships fully assembled. Place on a flat floor in your entryway, foyer, hallway, or beside the front door. For added stability, position against a wall or in a corner. The 3.9-inch depth fits in tight spots; the 7.8-inch width holds multiple umbrellas while staying compact. No tools, hardware, or assembly steps required.

Care

The powder-coated steel finish is more humidity-resistant than unfinished bare metal and suitable for indoor use; it tolerates covered outdoor placements (porches, balconies, screened entrances). Shake umbrellas off before placing them in the stand to reduce moisture buildup. Wipe the bottom tray occasionally to remove drips. Avoid abrasive cleaners or chemical solvents.

Frequently Asked Questions

How many umbrellas does this compact stand hold?
2-4 standard umbrellas, or 4-6 compact/folding umbrellas, depending on canopy size. Walking sticks and canes also fit comfortably. For golf umbrellas or larger umbrella collections, our 24-inch tall umbrella stand range offers more capacity in deeper footprints.

Does it have a drainage tray for wet umbrellas?
Yes. The bottom is enclosed to catch drips from wet umbrellas, helping keep wood floors and entryway rugs drier. Wipe the tray occasionally with a soft cloth to keep it clean; for heavy rain days, dump accumulated water before storing dry umbrellas inside again.

Is it stable for tall folding umbrellas?
The 7.8-inch wide base provides a stable footing for typical umbrella loads, including tall folding umbrellas. For best stability, position the stand against a wall — this is recommended for compact stands carrying taller or heavier umbrellas.

Can I use it outdoors on a covered porch?
The powder-coated finish is designed for indoor use; it tolerates covered outdoor placements like porches, balconies, and screened entrances. For direct rain or salt-spray exposure, choose covered locations and wipe dry after heavy rain or moisture exposure.

Does it require assembly?
No. The stand ships fully assembled — no tools, hardware, or assembly steps required. Unbox, place on a flat floor near your front door, and start using it immediately. The drip tray is pre-installed and ready for use.

You can check our Shipping Policy page