Handmade Minimalist Coat Rack gives coats, bags, and small carry items a clearer place near the door. The Handmade Minimalist Coat Rack from Grandmix is a horizontal metal-pipe bar with welded hooks at regular intervals — pure utility shaped as quiet decor. Available in 3 finishes (Black, White, Gold) across 3 sizes for 3, 5, or 7 hooks.

Why It Works

• Stripped-down horizontal pipe is the silhouette: Unlike themed coat racks with bird, tree, or letter motifs, the minimalist pipe-and-hook bar competes with nothing on the wall — works in modern, Scandinavian, industrial, and minimalist interiors where added ornament would clash.
• 3-inch projection from the wall: Coats hang on the hooks rather than forward off a tree-style branch — the slim depth keeps the rack close to the wall and out of walkway clearance in tight hallways.
• Three sizes scale by household: 10-inch (3 hooks) for entry corners or single-person flats; 19-inch (5 hooks) for couples; 28-inch (7 hooks) for family entryways — pick by the typical hung-item count rather than wall span.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Three sizes (H × W × D): 6 × 10 × 3 in / 15 × 25 × 8 cm (3 hooks); 6 × 19 × 3 in / 15 × 48 × 8 cm (5 hooks); 8 × 28 × 3 in / 20 × 70 × 8 cm (7 hooks). Slim 3-in profile from the wall.
• Capacity: 3, 5, or 7 hooks depending on size — coats, jackets, hats, bags, scarves
• Material: 15 × 15 mm metal pipe, electrostatic powder-coated steel
• Finishes: Black, White, Gold
• Weight: About 2 kg / 4.4 lb (Size 2)
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Modern entryway, hallway, bedroom, office, bathroom

What's Included

• Wall-mounted minimalist metal coat rack (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two mounting hole positions on the wall using a level — the rack has back-mounted brackets behind the pipe. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many coats does each size hold?
3 hooks (10-inch wide), 5 hooks (19-inch wide), or 7 hooks (28-inch wide). Each welded hook is sized for everyday coats, jackets, scarves, and bags. Mount into a stud or use anchors rated for your wall material to spread the load safely.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated steel finish handles standard indoor humidity well — entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and luxury or transitional decor. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page