Free Standing Towel Holder gives bathrooms, powder rooms, and guest suites a cleaner place for towels and daily essentials. The Free Standing Towel Holder from Grandmix is a slim 2 to 3-bar frame with a weighted base — drape full-size bath, hand, or beach towels with airflow on every side. Available in 3 finishes (Black, White, Gold) across 4 sizes.

Why It Works

• Free-standing — no drilling: Place beside a bathtub, in a bedroom corner, in a master suite, or by a pool deck — relocate seasonally without patching wall holes or matching tile after a remodel.
• Four sizes for towel count and ceiling fit: 32 to 42 inches tall in two width options — pick based on bath-towel volume and the ceiling height of the room.
• Slim 6-inch footprint: The narrow base footprint fits between a bathtub and the wall, beside a vanity, or in a corner where a wall-mount wouldn't reach.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Four sizes (H × W × D): 32 × 16 × 6 in / 80 × 40 × 15 cm; 34 × 20 × 6 in / 90 × 50 × 15 cm; 40 × 16 × 6 in / 100 × 40 × 15 cm; 42 × 24 × 6 in / 105 × 60 × 15 cm.
• Capacity: 2 to 3 horizontal bars depending on size — bath, hand, or beach towels
• Material: Powder-coated steel tube frame with weighted base
• Finishes: Black, White, Gold
• Weight: From about 2.5 kg / 5.5 lb at the smallest size
• Mounting: Free-standing — no mounting hardware required; sits flat on the floor or pool deck.
• Best placement: Bathroom corner, master suite, beside bathtub, indoor pool deck

What's Included

• Free-standing towel holder (size and finish as ordered)
• Care instructions

How to Use and Install

The unit ships in two halves — slot the upper frame into the weighted base and tighten the connection screws. Place on a flat, level floor; the weighted base keeps the frame stable when loaded with bath towels. Avoid uneven floors or steep slopes that could cause the unit to lean or tip.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; rinse off any salt-spray promptly.

Frequently Asked Questions

How many towels does each size hold?
32 and 34-inch sizes hold 2 bath or beach towels; 40 and 42-inch sizes hold 2 to 3 bath or beach towels with airflow. Lighter items like washcloths or hand towels can share a bar.

Does it tip over with wet towels?
The weighted base helps keep the frame stable when loaded with two or three wet bath towels on a flat, level floor. Avoid uneven floors, thick rugs, or pulling towels sideways with force; distribute heavier wet towels across the bars for better balance.

Can it be installed in a humid bathroom?
Yes. The powder-coated steel finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome bathroom fixtures; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic faucets, antique brass hardware, and luxury or transitional decor. Match the towel rack finish to faucet, towel hooks, or cabinet pull for the most cohesive look.

How do I clean the towel rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page