Mountain and Forest adds a laser-cut metal focal point for living rooms, bedrooms, and covered outdoor walls, with a cleaner presence than a flat print. The Mountain and Forest Metal Wall Art from Grandmix is a laser-cut mountain-and-pine landscape in galvanized steel — taller-format cutwork that reads as a statement-piece composition rather than printed wallpaper. Available in 10 sizes across Black, White, and dual-tone White Mountain with Black Forest finishes.

Why It Works

• Layered mountain and pine landscape: Mountains, ridges, and pine trees in cut-metal layers create depth no flat print can match — light passing across the surface throws moving shadow patterns.
• Ten sizes from accent to gallery wall: 18-inch compact accent to 110-inch gallery-wall feature — pick by available wall width and viewing distance.
• Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, mountain-cabin placement, and covered outdoor walls — direct rain on a covered patio is fine.
• Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.

Key Specs

• Dimensions: Ten sizes (H × W): 18 x 12 in / 46 x 31 cm; 24 x 16 in / 61 x 41 cm; 32 x 21 in / 81 x 54 cm; 40 x 27 in / 99 x 66 cm; 47 x 32 in / 119 x 80 cm; 55 x 37 in / 140 x 93 cm; 63 x 42 in / 160 x 107 cm; 79 x 53 in / 201 x 134 cm; 95 x 64 in / 241 x 161 cm; 110 x 74 in / 280 x 187 cm.
• Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
• Finishes: Black, White, White Mountain with Black Forest (dual-tone)
• Weight: From about 1.5 kg / 3.3 lb at smallest; sizes 47-inch and above ship in two-piece sections to prevent transit damage
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Mountain and Forest Metal Wall Art (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Living room feature walls, bedroom statement pieces, hallway galleries, dining room accents, home office walls, and entryway focal points all suit this design. The piece works as a single statement above a sofa, console, or bed, or paired with smaller decor elements as part of a curated gallery wall arrangement.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; the dual-tone White Mountain with Black Forest option pairs well with two-tone walls and contrasting furniture finishes. Check the size guide before ordering so the piece fits the wall span, furniture scale, and viewing distance you have in mind.

How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page