Mountain Peaks and Trees adds a laser-cut metal focal point for living rooms, bedrooms, and covered outdoor walls, with a cleaner presence than a flat print. The Mountain Peaks and Trees Metal Decor from Grandmix is a laser-cut mountain-with-pine-and-reflection composition in galvanized steel — layered cutwork that captures alpine depth with a two-tone White Mountain Black Forest finish or a unified all-Black option. Available in 9 sizes across two finish styles.

Why It Works

• Two-tone alpine landscape composition: White-mountain peaks layered over black-forest pine ridges create depth — a single composition that reads sculptural rather than flat-printed even from across a long wall.
• Nine sizes from accent to massive feature wall: From 18-inch compact to 95-inch oversized — pick by wall width above a sofa, headboard, mantel, or open-living-room feature wall.
• Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, mountain-cabin placement, and covered outdoor walls — direct rain on a covered porch is acceptable.
• Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first.

Key Specs

• Dimensions: Nine sizes (H × W): 18 x 14 in / 46 x 35 cm; 24 x 18 in / 61 x 46 cm; 32 x 24 in / 81 x 61 cm; 39 x 29 in / 99 x 74 cm; 47 x 35 in / 119 x 90 cm; 55 x 41 in / 140 x 105 cm; 63 x 47 in / 160 x 120 cm; 79 x 59 in / 201 x 150 cm; 95 x 71 in / 241 x 181 cm.
• Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
• Finishes: White Mountain Black Forest, Black
• Weight: From about 1.5 kg / 3.3 lb at smallest; sizes 47-inch and above ship in two-piece sections to prevent transit damage
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Mountain Peaks and Trees Metal Decor (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Living room feature walls, bedroom statement pieces, hallway galleries, dining room accents, home office walls, and entryway focal points all suit this design. The piece works as a single statement above a sofa, console, or bed, or paired with smaller decor elements as part of a curated gallery wall arrangement.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
White Mountain Black Forest two-tone reads as alpine-modern landscape art; the all-Black option suits monochrome industrial and urban-modern interiors. Match the wall art to nearby furniture, hardware, or decor accents — wood tones, neutral textiles, and natural-fiber rugs work especially well.

How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page