









DESCRIPTION
Mystic Sword and Tree Wall Sculpture adds a laser-cut metal focal point for living rooms, bedrooms, and covered outdoor walls, with a cleaner presence than a flat print. The Mystic Sword and Tree Wall Sculpture LOTR Narsil from Grandmix is a laser-cut sword-with-Tree-of-Gondor composition in galvanized steel — clean cutwork that reads as graphic design rather than printed paper memorabilia. Available in 5 sizes in a Black finish.
Why It Works
- Narsil sword and tree composition: Laser-cut sword paired with the iconic Tree-of-Gondor silhouette — graphic, modern, and instantly recognizable to fans of the wizarding-fantasy stories.
- Five sizes for any wall span: From 18-inch accent to 47-inch oversized — pick by wall width above a study console, gaming-den feature wall, or fantasy-themed bedroom.
- Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, basement-game-room exposure, and covered outdoor walls — direct rain on a covered porch is acceptable.
- Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above.
Key Specs
- Dimensions: Five sizes (H × W): 18 x 12 in / 46 x 31 cm; 24 x 16 in / 61 x 41 cm; 32 x 21 in / 81 x 54 cm; 39 x 26 in / 99 x 66 cm; 47 x 31 in / 119 x 80 cm.
- Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
- Finish: Black
- Weight: From about 1.5 kg / 3.3 lb at the smallest size
- Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.
What's Included
- Mystic Sword and Tree Wall Sculpture – LOTR Narsil (size and finish as ordered)
- Mounting screws and wall anchors
- Care instructions
How to Use and Install
Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.
Care
Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.
Frequently Asked Questions
Where does this work best?
Kids' rooms, teen bedrooms, gaming dens, playrooms, and hobby studios all suit this design. The piece works above a desk, bunk bed, or console-gaming station, especially when paired with neutral wall paint or shiplap that lets the cutout silhouette read clearly across the room.
How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.
Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.
How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors and pairs especially well with industrial or contemporary palettes. Match the wall art to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.
How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.
SPECIFICATIONS
SIZE GUIDE

SHIPPING & RETURNS
You can check our Shipping Policy page
Mystic Sword and Tree Wall Sculpture – LOTR Narsil
Free Shipping For US, UK, EU & CA
30-day returns
24/7 Customer Service
DESCRIPTION
Mystic Sword and Tree Wall Sculpture adds a laser-cut metal focal point for living rooms, bedrooms, and covered outdoor walls, with a cleaner presence than a flat print. The Mystic Sword and Tree Wall Sculpture LOTR Narsil from Grandmix is a laser-cut sword-with-Tree-of-Gondor composition in galvanized steel — clean cutwork that reads as graphic design rather than printed paper memorabilia. Available in 5 sizes in a Black finish.
Why It Works
- Narsil sword and tree composition: Laser-cut sword paired with the iconic Tree-of-Gondor silhouette — graphic, modern, and instantly recognizable to fans of the wizarding-fantasy stories.
- Five sizes for any wall span: From 18-inch accent to 47-inch oversized — pick by wall width above a study console, gaming-den feature wall, or fantasy-themed bedroom.
- Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, basement-game-room exposure, and covered outdoor walls — direct rain on a covered porch is acceptable.
- Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above.
Key Specs
- Dimensions: Five sizes (H × W): 18 x 12 in / 46 x 31 cm; 24 x 16 in / 61 x 41 cm; 32 x 21 in / 81 x 54 cm; 39 x 26 in / 99 x 66 cm; 47 x 31 in / 119 x 80 cm.
- Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
- Finish: Black
- Weight: From about 1.5 kg / 3.3 lb at the smallest size
- Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.
What's Included
- Mystic Sword and Tree Wall Sculpture – LOTR Narsil (size and finish as ordered)
- Mounting screws and wall anchors
- Care instructions
How to Use and Install
Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.
Care
Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.
Frequently Asked Questions
Where does this work best?
Kids' rooms, teen bedrooms, gaming dens, playrooms, and hobby studios all suit this design. The piece works above a desk, bunk bed, or console-gaming station, especially when paired with neutral wall paint or shiplap that lets the cutout silhouette read clearly across the room.
How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.
Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.
How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors and pairs especially well with industrial or contemporary palettes. Match the wall art to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.
How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.
SPECIFICATIONS
SIZE GUIDE

SHIPPING & RETURNS
You can check our Shipping Policy page

















