Open Window Design with Birds Silhouette works as a focused wall feature for living rooms, bedrooms, and covered outdoor walls when generic filler feels too flat. The Open Window Design with Birds Silhouette Metal Wall Art from Grandmix is a laser-cut window-frame-with-perched-birds composition in galvanized steel — open-air cutwork rendered with birds-on-wire and parrot-in-flight detail that reads as graphic design rather than printed reproduction. Available in 5 sizes across Black and White finishes.

Why It Works

• Window frame and birds composition: Laser-cut window frame with birds perched on wires and a parrot mid-flight — graphic, modern, and reads beautifully above a sun-room console, garden-themed feature wall, or open-air-styled feature wall.
• Five square sizes for gallery walls: From 18-inch accent to 47-inch oversized square — square format suits gallery-wall pairings or single-statement placement above a console, mantel, or sun-room feature wall.
• Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, sun-room placement, and covered outdoor walls — direct rain on a covered porch is acceptable.
• Checked before packing: Edges, coating, and hardware fit are reviewed before shipment so the product arrives ready for standard home installation.

Key Specs

• Dimensions: Five sizes (H × W): 18 x 18 in / 46 x 46 cm; 24 x 24 in / 61 x 61 cm; 32 x 32 in / 81 x 81 cm; 39 x 39 in / 99 x 99 cm; 47 x 47 in / 119 x 119 cm.
• Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
• Finishes: Black, White
• Weight: From about 1.5 kg / 3.3 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Open Window Design with Birds Silhouette Metal Wall Art (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Outdoor garden-feature walls (covered patios), sunroom interiors, conservatory accents, indoor-plant-styled living rooms, master-bedroom feature walls, and Zen meditation corners all suit this design. The piece works above a console, mantel, or sofa, especially when paired with potted plants, rattan furniture, or natural-fiber rugs.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page