








DESCRIPTION
Tired of pressed-rose prints that look like dollar-store decor? The ROSE Metal Wall Art from Grandmix is a laser-cut single-stem rose silhouette in galvanized steel — botanical linework with three-dimensional cutwork depth that reads as gallery botanical art rather than budget print. Available in 5 sizes across Black and White finishes.
Why It Works
- Single-stem rose silhouette: Continuous-line stem and petal cutwork reads as design-school botanical study — clean, modern, and timeless rather than overly ornate.
- Five sizes for any wall span: 18-inch suits a powder room or accent wall; 47-inch oversized commands a feature wall above a buffet, headboard, or sofa.
- Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, sun-room exposure, and covered outdoor walls — direct rain on a covered patio is acceptable.
- Designed by Grandmix for everyday use: Drawn and prototyped at Grandmix's Türkiye studio for considered craftsmanship, finished and checked by Grandmix before shipping.
Key Specs
- Dimensions: Five sizes (H × W): 18 x 11 in / 46 x 27 cm; 24 x 14 in / 61 x 36 cm; 32 x 19 in / 81 x 47 cm; 39 x 23 in / 99 x 58 cm; 47 x 27 in / 119 x 70 cm.
- Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
- Finishes: Black, White
- Weight: From about 1.5 kg / 3.3 lb at the smallest size
- Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.
What's Included
- ROSE Metal Wall Art (size and finish as ordered)
- Mounting screws and wall anchors
- Care instructions
How to Use and Install
Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.
Care
Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.
Frequently Asked Questions
Where does this work best?
Living room feature walls, bedroom statement pieces, hallway galleries, dining room accents, home office walls, and entryway focal points all suit this design. The piece works as a single statement above a sofa, console, or bed, or paired with smaller decor elements as part of a curated gallery wall arrangement.
How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.
Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.
How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.
How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.
Free shipping to the United States, United Kingdom, European countries, and Canada. 30-day returns. See our shipping and refund policies for current details.
SPECIFICATIONS
SIZE GUIDE

SHIPPING & RETURNS
You can check our Shipping Policy page
ROSE Metal Wall Art
Free Shipping For US, CA & EU
30-day returns
24/7 Customer Service
DESCRIPTION
Tired of pressed-rose prints that look like dollar-store decor? The ROSE Metal Wall Art from Grandmix is a laser-cut single-stem rose silhouette in galvanized steel — botanical linework with three-dimensional cutwork depth that reads as gallery botanical art rather than budget print. Available in 5 sizes across Black and White finishes.
Why It Works
- Single-stem rose silhouette: Continuous-line stem and petal cutwork reads as design-school botanical study — clean, modern, and timeless rather than overly ornate.
- Five sizes for any wall span: 18-inch suits a powder room or accent wall; 47-inch oversized commands a feature wall above a buffet, headboard, or sofa.
- Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, sun-room exposure, and covered outdoor walls — direct rain on a covered patio is acceptable.
- Designed by Grandmix for everyday use: Drawn and prototyped at Grandmix's Türkiye studio for considered craftsmanship, finished and checked by Grandmix before shipping.
Key Specs
- Dimensions: Five sizes (H × W): 18 x 11 in / 46 x 27 cm; 24 x 14 in / 61 x 36 cm; 32 x 19 in / 81 x 47 cm; 39 x 23 in / 99 x 58 cm; 47 x 27 in / 119 x 70 cm.
- Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
- Finishes: Black, White
- Weight: From about 1.5 kg / 3.3 lb at the smallest size
- Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.
What's Included
- ROSE Metal Wall Art (size and finish as ordered)
- Mounting screws and wall anchors
- Care instructions
How to Use and Install
Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.
Care
Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.
Frequently Asked Questions
Where does this work best?
Living room feature walls, bedroom statement pieces, hallway galleries, dining room accents, home office walls, and entryway focal points all suit this design. The piece works as a single statement above a sofa, console, or bed, or paired with smaller decor elements as part of a curated gallery wall arrangement.
How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.
Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.
How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.
How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.
Free shipping to the United States, United Kingdom, European countries, and Canada. 30-day returns. See our shipping and refund policies for current details.
SPECIFICATIONS
SIZE GUIDE

SHIPPING & RETURNS
You can check our Shipping Policy page


















