Ship helps living rooms, offices, and gallery walls feel more finished with a physical wall piece instead of another framed poster. The Ship Metal Wall Art from Grandmix is a laser-cut tall-sailing-ship-with-flags composition in galvanized steel — multi-mast vessel silhouette rendered in clean cutwork that reads as design-school graphic art rather than printed canvas reproduction. Available in 5 sizes across Black and White finishes.

Why It Works

• Multi-mast sailing-ship silhouette: Laser-cut tall ship with full rigging and flags — graphic, modern, and reads beautifully above a coastal-living-room sofa, study desk, or maritime-themed feature wall.
• Five sizes for any wall span: From 18-inch accent to 47-inch oversized — pick by wall width above a console, study desk, or coastal-feature-wall.
• Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, lake-house placement, and covered outdoor walls — direct rain on a covered porch is acceptable.
• Checked before packing: Edges, coating, and hardware fit are reviewed before shipment so the product arrives ready for standard home installation.

Key Specs

• Dimensions: Five sizes (H × W): 18 x 14 in / 46 x 35 cm; 24 x 18 in / 61 x 46 cm; 32 x 24 in / 81 x 61 cm; 39 x 29 in / 99 x 74 cm; 47 x 35 in / 119 x 90 cm.
• Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
• Finishes: Black, White
• Weight: From about 1.5 kg / 3.3 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Ship Metal Wall Art (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Coastal-cottage living rooms, lake-house feature walls, nautical-themed dens, beach-house entryways, sailing-club lounges, and covered-porch outdoor walls all suit this design. The piece works above a console, mantel, or sofa, especially when paired with rope, brass, or driftwood accents in the surrounding decor.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page