Toilet Paper And Mobile Phone Holder helps bathrooms, powder rooms, and guest suites stay easier to reset after everyday use. The Toilet Paper And Mobile Phone Holder from Grandmix is a wall-mounted toilet paper holder with a small phone shelf above the roll, sized for a smartphone or essentials. Available in 3 finishes (Black, White, Gold) at Approximately 3.1 in / 8 cm H × 7 in / 18 cm W × 3.5 in / 9 cm D.

Why It Works

• Phone shelf at toilet-seated reach height: Unlike phone holders mounted across the room or on the floor, the integrated shelf sits directly above the roll at arm-reach when seated — drop the phone in landscape or portrait without straining or risking floor damage.
• Single wall mount instead of two fixtures: Combines the function of a basic roll holder plus a separate phone-shelf accessory in one wall mount — fewer holes in tile, cleaner sightline.
• Powder-coated steel handles bathroom humidity: Unlike unfinished bare metal that can show humidity spots in poorly ventilated bathrooms, the electrostatic powder-coat finish stays uniform under typical bathroom moisture exposure when wiped dry after heavy splash.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: Approximately 3.1 in / 8 cm H × 7 in / 18 cm W × 3.5 in / 9 cm D
• Capacity: 1 in-use roll + 1 phone (or small bathroom essential) on the integrated upper phone shelf
• Material: 1.5 mm cold-rolled steel, electrostatic powder-coated
• Finishes: Black, White, Gold
• Weight: About 0.6 kg / 1.3 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the holder's loaded weight.
• Best placement: Beside the toilet, primary bathrooms where phones get used during the visit

What's Included

• Wall-mounted toilet paper and phone holder (assembled, finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting hole positions on the wall using a level. Drill pilot holes (use a tile-specific carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the unit on the screws via the back-mounted brackets. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel frame with a soft, dry cloth to remove dust and incidental humidity. For deeper cleaning, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; install outside direct shower-spray zones and wipe dry after heavy moisture exposure.

Frequently Asked Questions

What size phones fit on the shelf?
The shelf comfortably accommodates standard smartphones up to about 7 in / 18 cm long including most cases. Larger tablets and folded foldables (Z Fold open) are too wide for the shelf footprint; place those flat on a separate surface instead.

What walls and hardware does it work with?
Mounting screws and anchors are included for drywall installations. For tile, plaster, or masonry walls, swap to wall-specific anchors rated for the holder's loaded weight; use a tile-specific drill bit (carbide-tipped) at low speed for tile.

Is the powder-coat finish safe for humid bathrooms?
Yes. The powder-coated steel finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do I match the finish to existing bathroom hardware?
Black works with matte-black, chrome, and modern monochrome fixtures; White suits Scandinavian, neutral, and minimalist bathrooms; Gold complements warm metallic faucets, antique brass hardware, and luxury or transitional styles. For the most cohesive look, match the holder finish to the faucet, towel bar, or cabinet pull in your bathroom.

How do I clean the holder?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots or product residue, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page