Towel Holder helps bathrooms, powder rooms, and guest suites stay easier to reset after everyday use. The Towel Holder from Grandmix is a slim wall-mounted double-bar in three finishes — minimal profile, maximum function. Available in 3 finishes (Black, White, Gold).

Why It Works

• Two bars cover daily towel rotation: One bar for the bath towel, one for the hand or face towel — covers a full daily rotation in a powder room or single-user bathroom without an over-engineered multi-tier rack.
• Slim 6-inch projection saves walkway clearance: The shallow projection keeps the rack close to the wall — useful in narrow bathrooms or beside vanities where deeper racks would be in the way.
• 20-inch width handles full bath towels: The full 20-inch bar width comfortably accommodates a folded full-size bath towel without bunching or hanging off the end.
• Checked before packing: Edges, coating, and hardware fit are reviewed before shipment so the product arrives ready for standard home installation.

Key Specs

• Dimensions: Approx 5 in / 12.5 cm H × 20 in / 50 cm W × 6 in / 15 cm D — wall-mounted double-bar holder.
• Capacity: 2 horizontal bars — bath towel on one bar, hand or face towel on the other
• Material: Powder-coated steel tube frame, electrostatic finish
• Finishes: Black, White, Gold
• Weight: About 1 kg / 2.2 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Bathroom, ensuite, powder room, master bath

What's Included

• Wall-mounted double-bar towel holder (finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two end-mount hole positions on the wall using a level — the holder has wall-mount brackets at each end. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Tighten the bracket setscrews to lock the bars in place. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; rinse off any salt-spray promptly.

Frequently Asked Questions

How many towels does it hold?
Two folded bath towels (one per bar), or one bath towel and a hand towel side by side. The 20-inch bar width comfortably accommodates standard bath-towel folds, and the open spacing keeps each towel airing rather than pressed flat against the wall after a shower.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in a humid bathroom?
Yes. The powder-coated steel finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome bathroom fixtures; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic faucets, antique brass hardware, and luxury or transitional decor. Match the towel rack finish to faucet, towel hooks, or cabinet pull for the most cohesive look.

How do I clean the towel rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page