






DESCRIPTION
Tree of Life (3 Panels) turns open wall space in living rooms, bedrooms, and covered outdoor walls into a defined metal silhouette. The Tree of Life Wall Art (3 Panels) from Grandmix is a laser-cut tree-of-life triptych in galvanized steel — three coordinated panels that span the full width of a sofa, headboard, or fireplace mantel as a single composition. Available in 8 sizes across Black and White finishes.
Why It Works
- Triptych composition spans wide walls: Three coordinated panels work as a single visual rhythm — fills the full width of a 6-foot sofa or queen-bed headboard wall without needing supporting decor.
- Tree-of-life silhouette in cut metal: Laser-cut branches and root detail layered in galvanized steel — the negative space between branches lets wall color show through, making the design feel airy.
- Eight sizes from accent to oversized: 32-inch (set width) suits a small console; 110-inch (set width) anchors a master bedroom or open-living-room feature wall.
- Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.
Key Specs
- Dimensions: Eight sizes (H × W): 32 x 13 in / 81 x 34 cm (set); 39 x 16 in / 99 x 41 cm (set); 47 x 20 in / 119 x 50 cm (set); 55 x 23 in / 140 x 58 cm (set); 71 x 30 in / 180 x 75 cm (set); 79 x 33 in / 201 x 84 cm (set); 95 x 40 in / 241 x 101 cm (set); 110 x 45 in / 280 x 115 cm (set).
- Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
- Finishes: Black, White
- Weight: From about 2.5 kg / 5.5 lb for the smallest set; larger sets ship in panel-by-panel boxes
- Mounting: Wall-mounted as a 3-panel set; mounting screws and anchors are included for each panel. Space panels 1-2 inches apart for the recommended layout.
What's Included
- Tree of Life Wall Art (3 Panels) (size and finish as ordered)
- 3 coordinated panels (left, center, right)
- Mounting screws and wall anchors
- Care instructions
How to Use and Install
Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.
Care
Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.
Frequently Asked Questions
Where does this work best?
Living room feature walls, bedroom statement pieces, hallway galleries, dining room accents, home office walls, and entryway focal points all suit this design. The piece works as a single statement above a sofa, console, or bed, or paired with smaller decor elements as part of a curated gallery wall arrangement.
How does it mount to the wall?
Each panel ships with mounting screws and wall anchors. Mark all panel positions on the wall using a level (panels are spaced about 1-2 inches apart for visual rhythm), drill pilot holes, insert anchors, and drive the screws.
Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.
How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.
How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.
SPECIFICATIONS
SIZE GUIDE

SHIPPING & RETURNS
You can check our Shipping Policy page
Tree of Life Wall Art (3 Panels)
Free Shipping For US, UK, EU & CA
30-day returns
24/7 Customer Service
DESCRIPTION
Tree of Life (3 Panels) turns open wall space in living rooms, bedrooms, and covered outdoor walls into a defined metal silhouette. The Tree of Life Wall Art (3 Panels) from Grandmix is a laser-cut tree-of-life triptych in galvanized steel — three coordinated panels that span the full width of a sofa, headboard, or fireplace mantel as a single composition. Available in 8 sizes across Black and White finishes.
Why It Works
- Triptych composition spans wide walls: Three coordinated panels work as a single visual rhythm — fills the full width of a 6-foot sofa or queen-bed headboard wall without needing supporting decor.
- Tree-of-life silhouette in cut metal: Laser-cut branches and root detail layered in galvanized steel — the negative space between branches lets wall color show through, making the design feel airy.
- Eight sizes from accent to oversized: 32-inch (set width) suits a small console; 110-inch (set width) anchors a master bedroom or open-living-room feature wall.
- Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.
Key Specs
- Dimensions: Eight sizes (H × W): 32 x 13 in / 81 x 34 cm (set); 39 x 16 in / 99 x 41 cm (set); 47 x 20 in / 119 x 50 cm (set); 55 x 23 in / 140 x 58 cm (set); 71 x 30 in / 180 x 75 cm (set); 79 x 33 in / 201 x 84 cm (set); 95 x 40 in / 241 x 101 cm (set); 110 x 45 in / 280 x 115 cm (set).
- Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
- Finishes: Black, White
- Weight: From about 2.5 kg / 5.5 lb for the smallest set; larger sets ship in panel-by-panel boxes
- Mounting: Wall-mounted as a 3-panel set; mounting screws and anchors are included for each panel. Space panels 1-2 inches apart for the recommended layout.
What's Included
- Tree of Life Wall Art (3 Panels) (size and finish as ordered)
- 3 coordinated panels (left, center, right)
- Mounting screws and wall anchors
- Care instructions
How to Use and Install
Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.
Care
Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.
Frequently Asked Questions
Where does this work best?
Living room feature walls, bedroom statement pieces, hallway galleries, dining room accents, home office walls, and entryway focal points all suit this design. The piece works as a single statement above a sofa, console, or bed, or paired with smaller decor elements as part of a curated gallery wall arrangement.
How does it mount to the wall?
Each panel ships with mounting screws and wall anchors. Mark all panel positions on the wall using a level (panels are spaced about 1-2 inches apart for visual rhythm), drill pilot holes, insert anchors, and drive the screws.
Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.
How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.
How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.
SPECIFICATIONS
SIZE GUIDE

SHIPPING & RETURNS
You can check our Shipping Policy page


















