Minimalist Vertical Towel Storage helps bathrooms, powder rooms, and guest suites stay easier to reset after everyday use. The Minimalist Vertical Towel Storage from Grandmix is a slim wall-mounted frame that cradles rolled towels on top of each other — 4 to 12 inches deep depending on size. Available in 4 finishes (Black, White, Gold, Satine Nickel).

Why It Works

• Vertical roll storage saves wall span: Where horizontal bars take up 24 to 36 inches of wall, this vertical stacker fits in a 4-inch-wide column — turns a narrow strip of wall (between sink and shower, beside the toilet) into useful towel storage.
• Four sizes for towel-roll count: 12-inch holds 2 rolled hand towels; 16-inch holds 3 rolled hand or face towels; 20-inch holds 4 rolled bath towels; 24-inch holds 5 to 6 rolled bath towels — pick by household towel rotation.
• Open-front design lets towels read as decor: The towels themselves become the visual element — neatly rolled, color-coordinated towels turn the rack into spa-style display rather than hidden storage.
• Checked before packing: Edges, coating, and hardware fit are reviewed before shipment so the product arrives ready for standard home installation.

Key Specs

• Dimensions: Four sizes (H × W): 12 × 4 in / 30 × 10 cm; 16 × 4 in / 40 × 10 cm; 20 × 4 in / 50 × 10 cm; 24 × 4 in / 60 × 10 cm.
• Capacity: Stack of rolled towels held vertically against the wall — 2 to 6 rolled towels depending on size selected
• Material: Powder-coated steel rod frame, electrostatic finish
• Finishes: Black, White, Gold, Satine Nickel
• Weight: From about 0.4 kg / 0.9 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Bathroom, ensuite, powder room, master bath

What's Included

• Wall-mounted minimalist vertical towel storage (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two top mounting hole positions on the wall using a level — the rack has integrated keyhole openings at the top mounting plate. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; rinse off any salt-spray promptly.

Frequently Asked Questions

How many towels does each size hold?
12-inch holds 2 to 3 rolled hand towels; 16-inch holds 3 to 4 rolled hand or face towels; 20-inch holds 4 to 5 rolled bath towels; 24-inch holds 5 to 6 rolled bath towels. Roll towels tightly for a clean stack and balanced load distribution.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in a humid bathroom?
Yes. The powder-coated steel finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome fixtures; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic faucets, antique brass hardware, and luxury decor; Satine Nickel pairs with brushed chrome, stainless faucets, and contemporary spa-style bathrooms. Match the rack finish to faucet, towel hooks, or cabinet pulls for cohesion.

How do I clean the towel rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page