Music Notes Hanger gives coats, bags, and small carry items a clearer place near the door. The Music Notes Hanger from Grandmix laser-cuts musical notes (treble clef, eighth notes, beamed pairs) along a horizontal stave with hooks integrated into the composition. Available in 2 finishes (Black, White) across 5 sizes from 18 in / 45 cm to 47 in / 120 cm wide.

Why It Works

• Music-notes silhouette themes the room: Unlike generic hook strips, the staff-and-notes silhouette signals 'music space', fits practice rooms, home recording studios, music schools, conservatory foyers, and themed bedrooms for musicians.
• Slim 6-16-inch height fits above instruments: The horizontal silhouette tucks above pianos, music stands, or instrument cases without competing for vertical wall space, leaves room for sheet music shelves or framed performance posters.
• Five sizes from accent to studio feature: The 18-inch suits a practice corner; the 47-inch dominates a music school or large studio entryway.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Five sizes (W × H): 18 × 6 in / 45 × 15 cm (3 hooks); 24 × 8 in / 60 × 20 cm (3 hooks); 32 × 11 in / 80 × 27 cm (4 hooks); 39 × 13 in / 100 × 33 cm (5 hooks); 47 × 16 in / 120 × 40 cm (6 hooks). Stands 0.6 in / 1.5 cm from the wall.
• Capacity: 3 to 6 hooks depending on size, coats, scarves, bags, lightweight jackets
• Material: 1.5 mm laser-cut powder-coated galvanized metal, electrostatic powder-coated
• Finishes: Black, White
• Weight: From about 0.5 kg / 1.1 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Music studio, practice room, themed bedroom, music school, conservatory entryway

What's Included

• Wall-mounted music notes hanger (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two mounting hole positions on the wall using a level, the rack has integrated keyhole openings at the back. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many items does each size hold?
3 hooks (18-inch and 24-inch), 4 hooks (32-inch), 5 hooks (39-inch), or 6 hooks (47-inch). Each hook comfortably holds a coat, scarf, light jacket, or bag, useful for a musician's hat, jacket, or practice bag at the studio entry.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated galvanized metal finish handles standard indoor humidity well, entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes, both finishes pair well across entryways, mudrooms, and bedrooms. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page