Metal Key Hanger gives coats, bags, and small carry items a clearer place near the door. The Metal Key Hanger from Grandmix laser-cuts a key-silhouette wall hanger with hooks integrated for the household's everyday keys, lanyards, and small bags. Available in 2 finishes (Black, White) across 5 sizes from 18 in / 46 cm to 47 in / 119 cm wide.

Why It Works

• Themed key-silhouette signals the function: Unlike generic hook strips, the key-shaped silhouette announces 'keys go here' — household members and guests intuitively know where to leave keys, reducing daily search time.
• Sized for keys, not coats: The 5- to 16-inch height (depending on size) and slim hooks suit keychains, lanyards, light scarves, and small bags — not heavy winter coats. Use a separate coat rack for outerwear.
• Mount near the front door for habit-building: Position 4-5 feet above the floor near the door — automatic in-and-out: drop keys on entry, grab on exit. Builds the routine without thinking.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: Five sizes (W × H): 18 × 6 in / 46 × 15 cm (3 hooks); 24 × 8 in / 61 × 20 cm (3 hooks); 32 × 11 in / 81 × 27 cm (4 hooks); 39 × 13 in / 99 × 33 cm (5 hooks); 47 × 16 in / 119 × 40 cm (6 hooks). Stands 0.6 in / 1.5 cm from the wall.
• Capacity: 3 to 6 hooks depending on size — keys, lanyards, light scarves, lightweight bags
• Material: 1.5 mm laser-cut steel, electrostatic powder-coated
• Finishes: Black, White
• Weight: From about 0.5 kg / 1.1 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Entryway, near front door, mudroom, garage entry, office

What's Included

• Wall-mounted metal key hanger (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two mounting hole positions on the wall using a level — typically 4-5 feet above the floor near the front door for easy in-and-out access. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many keys can it hold?
3 hooks (18-inch and 24-inch), 4 hooks (32-inch), 5 hooks (39-inch), or 6 hooks (47-inch). Each hook fits a single keyring or lanyard, or a couple of light keys grouped together. Best for everyday entry and car keys, not bulky coats.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated steel finish handles standard indoor humidity well — entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes — both finishes pair well across entryways, mudrooms, and bedrooms. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page