Metal NASA Sign gives media rooms, offices, and hobby spaces a sharper visual anchor through cut metal, shadow, and a clean finish. The Metal NASA Sign Wall Art from Grandmix is a laser-cut NASA wordmark logo in galvanized steel — clean script-and-emblem cutwork that reads as graphic design rather than mass-printed novelty. Available in 11 sizes across Black and White finishes.

Why It Works

• Iconic NASA wordmark in cut steel: Precision-cut script logo with the planetary emblem details intact — clean lines, no rough edges, no stamping marks visible from across the room.
• Eleven sizes from accent to oversized: 18-inch fits a kid's bookshelf wall; 95-inch oversized commands a feature wall in a teen room, gaming den, or home theater space.
• Galvanized steel + powder-coat: Rust-resistant finish handles indoor humidity, basement-game-room exposure, and covered outdoor walls — direct rain on a covered patio is acceptable.
• Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first.

Key Specs

• Dimensions: Eleven sizes (H × W): 18 x 6 in / 46 x 15 cm; 24 x 8 in / 61 x 20 cm; 32 x 11 in / 81 x 27 cm; 39 x 13 in / 99 x 33 cm; 47 x 16 in / 119 x 40 cm; 55 x 18 in / 140 x 47 cm; 63 x 21 in / 160 x 53 cm; 71 x 24 in / 180 x 60 cm; 79 x 26 in / 201 x 67 cm; 87 x 29 in / 221 x 74 cm; 95 x 32 in / 241 x 81 cm.
• Material: Galvanized steel with electrostatic powder-coat finish (rust-resistant)
• Finishes: Black, White
• Weight: From about 1.5 kg / 3.3 lb at smallest; sizes 47-inch and above ship in two-piece sections to prevent transit damage
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the art's loaded weight.

What's Included

• Metal NASA Sign Wall Art (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting points on the wall using a level. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the artwork on the screws. Install takes under 15 minutes with a basic drill. Choose anchors rated for your wall material and the art's loaded weight.

Care

Wipe the powder-coated galvanized steel with a soft, dry cloth or microfiber to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents. Designed primarily for indoor walls; covered outdoor placement (porch, patio, balcony) is acceptable including direct rain — the rust-resistant finish sheds water. Rinse off any salt-spray and wipe dry after coastal exposure.

Frequently Asked Questions

Where does this work best?
Kids' rooms, teen bedrooms, gaming dens, playrooms, and hobby studios all suit this design. The piece works above a desk, bunk bed, or console-gaming station, especially when paired with neutral wall paint or shiplap that lets the cutout silhouette read clearly across the room.

How does it mount to the wall?
Each piece ships with mounting screws and wall anchors. Mark the mounting points with a level for alignment, drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included anchors, and drive the screws. Choose anchors rated for your wall material and the art's loaded weight — drywall, plaster, masonry, or tile.

Is it safe for outdoor use?
Designed primarily for indoor walls. Covered outdoor placement is acceptable — galvanized steel with electrostatic powder-coat finish is rust-resistant and sheds water, so a covered porch, patio, or balcony with direct rain exposure is fine. Rinse off any salt-spray and wipe dry after coastal exposure for longer finish life.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes. Match the wall art finish to nearby furniture, hardware, or decor accents for the most cohesive look — especially picture frames, lamp bases, and shelving.

How do I clean the wall art?
Wipe the powder-coated steel with a soft, dry microfiber cloth to remove dust. For sticky spots or fingerprints, a damp cloth with mild non-abrasive cleaner works. Avoid abrasive scouring pads or chemical solvents that can dull the finish over time. Rinse off any salt-spray and wipe dry.

You can check our Shipping Policy page