Minimalist Wall Mounted Slipper Rack for Small Space Organization keeps entry shoes off the floor while preserving a clean storage profile. The Minimalist Wall Mounted Slipper Rack from Grandmix is a wider 23-inch wall-mounted design for 3 pairs in a row, slim profile, no extras. Available in 3 finishes (Black, White, Gold) at Approximately 6 in / 15 cm H × 23 in / 58 cm W × 4 in / 10 cm D.

Why It Works

• Wall-mounted reclaims floor space: Unlike freestanding racks that occupy walkway floor in narrow entryways, the wall-mounted design lifts slippers entirely off the floor — easier vacuuming, more space for foot traffic, no tripping risk.
• Wider 23-inch span for 3-pair single row: Holds 3 pairs in a clean horizontal line — no stacking, no tiering, every pair visible at a glance. Cleaner sightline than vertical multi-tier racks.
• Stripped-down silhouette — no wood, no extras: Pure powder-coated metal pipe — minimalist visual weight that doesn't compete with entryway art, mirror, or other wall decor.
• Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.

Key Specs

• Dimensions: Approximately 6 in / 15 cm H × 23 in / 58 cm W × 4 in / 10 cm D
• Capacity: 3 pairs of standard adult slippers
• Material: 15 × 15 mm metal pipe, electrostatic powder-coated
• Finishes: Black, White, Gold
• Weight: About 2 kg / 4.4 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Narrow entryways, hallways, apartment walls where floor space matters

What's Included

• Wall-mounted minimalist slipper rack (assembled, finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting hole positions on the wall using a level; recommended mounting height is 8-10 inches above the floor. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws via the back-mounted brackets. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated frame with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure.

Frequently Asked Questions

How many slipper pairs does it hold?
The rack comfortably holds 3 pairs of standard adult slippers in a single horizontal row. House slippers, slip-ons, and flat-soled indoor shoes all fit; bulkier outdoor sneakers may not slide cleanly into the slim slot profile.

How does it mount to the wall?
Mounting screws and anchors are included for drywall installations. For tile, plaster, or masonry walls, swap to wall-specific anchors rated for the rack's loaded weight; use a tile-specific drill bit (carbide-tipped) at low speed for tile. Recommended mounting height: 8-10 inches above the floor.

What height should I mount it at?
Recommended mounting height is 8-10 inches above the floor so slippers stay easy to reach while standing. Mount lower for children's slippers, or slightly higher if your entryway has nearby stairs and slippers are picked up while bending.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and luxury or transitional decor. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page