Multifunctional Bathroom Shelf With Toilet Paper Holder keeps bathrooms, powder rooms, and guest suites better organized without making the room feel crowded. The Multifunctional Bathroom Shelf With Toilet Paper Holder from Grandmix is a wall-mounted multifunctional unit with a toilet paper bar plus a generous upper shelf for toiletries, decor, or reserve rolls. Available in 3 finishes (Black, White, Gold) at Approximately 14 in / 36 cm H × 14 in / 36 cm W × 5 in / 13 cm D.

Why It Works

• Larger shelf works for toiletries, decor, or reserve rolls: Unlike single-roll holders or shallow accessory shelves, the wider top surface holds 1-2 reserve rolls beside toiletries, a candle, or a small plant — single fixture, multiple bathroom storage needs covered.
• Wall-mounted reclaims floor space: Frees the bathroom floor for cleaning while keeping toilet paper, soap, and small accessories within seated reach.
• Powder-coated steel handles bathroom humidity: Unlike unfinished bare metal that can show humidity spots in poorly ventilated bathrooms, the electrostatic powder-coat finish stays uniform under typical bathroom moisture exposure when wiped dry after heavy splash.
• Made for real rooms: The final form is kept practical to install, simple to clean, and easy to coordinate with the finish options above.

Key Specs

• Dimensions: Approximately 14 in / 36 cm H × 14 in / 36 cm W × 5 in / 13 cm D
• Capacity: 1 in-use roll on the holder bar + multiple toiletries / decor / 1-2 reserve rolls on the upper multi-purpose shelf
• Material: 1.5 mm cold-rolled steel + integrated shelf surface, electrostatic powder-coated
• Finishes: Black, White, Gold
• Weight: About 2 kg / 4.4 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the holder's loaded weight.
• Best placement: Above the toilet, beside the sink, in mid-size bathrooms needing flexible storage

What's Included

• Wall-mounted multifunctional bathroom shelf with toilet paper holder (assembled, finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting hole positions on the wall using a level. Drill pilot holes (use a tile-specific carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the unit on the screws via the back-mounted brackets. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel frame with a soft, dry cloth to remove dust and incidental humidity. For deeper cleaning, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; install outside direct shower-spray zones and wipe dry after heavy moisture exposure.

Frequently Asked Questions

How many rolls and what else fits?
The lower bar holds 1 in-use roll. The upper shelf comfortably holds 1-2 reserve rolls beside a soap dispenser, a small candle, or a phone — wider footprint than basic shelves means more flexibility for daily essentials and decor.

What walls and hardware does it work with?
Mounting screws and anchors are included for drywall. For tile, plaster, or masonry walls, swap to wall-specific anchors rated for the loaded weight; for full-shelf loads on stud-free drywall, anchoring into a stud (when alignment allows) adds extra security.

Is the powder-coat finish safe for humid bathrooms?
Yes. The powder-coated steel finish handles typical bathroom humidity well; for best longevity, install or place the unit outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish.

How do I match the finish to existing bathroom hardware?
Black works with matte-black, chrome, and modern monochrome fixtures; White suits Scandinavian, neutral, and minimalist bathrooms; Gold complements warm metallic faucets, antique brass hardware, and luxury or transitional styles. For the most cohesive look, match the holder finish to the faucet, towel bar, or cabinet pull in your bathroom.

How do I clean the holder?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots or product residue, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page