Swan and Forest Hanging Rack keeps bathrooms, powder rooms, and guest suites better organized without making the room feel crowded. The Swan and Forest Hanging Rack from Grandmix laser-cuts a horizontal landscape composition with hooks integrated below. Available in 2 finishes (Black, White) across 5 sizes from 18 in / 45 cm to 47 in / 120 cm wide.

Why It Works

• Landscape-scene silhouette reads as decor: Unlike single-motif racks, the swan-on-water-with-forest scene tells a small visual story — fits lake-house cottages, naturalist living rooms, sunrooms, and themed nurseries where decor narrative matters.
• Horizontal landscape proportions for narrow walls: The 8- to 20-inch height (depending on size) fits above doorways, beside hallway shelving, or below picture rails — narrower than tall vertical tree silhouettes.
• Five sizes from accent to feature: The 18-inch suits a small lake-cottage entry; the 47-inch dominates a feature wall in a sunroom or themed living room.
• Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.

Key Specs

• Dimensions: Five sizes (W × H): 18 × 8 in / 45 × 19 cm (3 hooks); 24 × 10 in / 60 × 25 cm (3 hooks); 32 × 13 in / 80 × 34 cm (4 hooks); 39 × 16 in / 100 × 41 cm (5 hooks); 47 × 20 in / 120 × 50 cm (6 hooks). Stands 0.6 in / 1.5 cm from the wall.
• Capacity: 3 to 6 hooks depending on size — coats, jackets, scarves, bags
• Material: 1.5 mm laser-cut steel, electrostatic powder-coated
• Finishes: Black, White
• Weight: From about 0.5 kg / 1.1 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Entryway, sunroom, lake-house cottage, naturalist living room, themed nursery

What's Included

• Wall-mounted swan-and-forest hanging rack (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two mounting hole positions on the wall using a level — the rack has integrated keyhole openings at the back. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many coats does each size hold?
3 hooks (18-inch and 24-inch), 4 hooks (32-inch), 5 hooks (39-inch), or 6 hooks (47-inch). Each hook comfortably holds a coat, jacket, scarf, or bag. The hooks sit below the swan-and-forest silhouette. Choose the size by hook count and wall span, then use anchors rated for the wall material and expected load.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated steel finish handles standard indoor humidity well — entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes — both finishes pair well across entryways, mudrooms, and bedrooms. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page