Tree Branch Hanging Rack Decor turns open wall space in living rooms, bedrooms, and covered outdoor walls into a defined metal silhouette. The Tree Branch Hanging Rack Decor from Grandmix laser-cuts a horizontal branching limb with hooks integrated along its length. Available in 2 finishes (Black, White) across 5 sizes from 18 in / 46 cm to 47 in / 119 cm wide.

Why It Works

• Horizontal branch silhouette reads as natural decor: Unlike straight hook strips, the organic asymmetric branch shape reads as a piece of nature on the wall — fits entryways inspired by Scandinavian, Japandi, modern naturalist, or biophilic interiors.
• Slim 5- to 12-inch height stays under shelves: The narrow horizontal proportions fit under entryway mirrors, picture rails, or shelving without competing for vertical wall space.
• Five sizes from accent to full entryway: The 18-inch suits a hallway corner or near a side door; the 47-inch dominates a feature foyer wall — pick by the wall span, not just by hooks.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: Five sizes (W × H): 18 × 5 in / 46 × 11 cm; 24 × 6 in / 61 × 15 cm; 32 × 8 in / 81 × 20 cm; 39 × 10 in / 99 × 25 cm; 47 × 12 in / 119 × 30 cm. Stands 0.6 in / 1.5 cm from the wall.
• Capacity: 3 to 6 hooks depending on size — coats, scarves, hats, keys
• Material: 1.5 mm laser-cut steel, electrostatic powder-coated
• Finishes: Black, White
• Weight: From about 0.5 kg / 1.1 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Entryway, hallway, mudroom, sunroom, modern naturalist interior

What's Included

• Wall-mounted tree-branch hanging rack (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two mounting hole positions on the wall using a level — the rack has integrated keyhole openings at the back. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many items does each size hold?
3 hooks (18-inch and 24-inch), 4 hooks (32-inch), 5 hooks (39-inch), or 6 hooks (47-inch). Each hook integrates into the branch — works well for coats, scarves, hats, and keys; also doubles as a small wall-art piece holding nothing.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated steel finish handles standard indoor humidity well — entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes — both finishes pair well across entryways, mudrooms, and bedrooms. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page