Wall Mounted Toilet Paper Holder adds practical bathroom storage in a compact, finished profile. The Wall Mounted Toilet Paper Holder from Grandmix is a vertical wall-mounted holder that stacks 4-5 spare rolls vertically with the in-use roll at the bottom — week-plus supply within reach in a slim wall footprint. Available in 3 finishes (Black, White, Gold) at Approximately 17.7 in / 45 cm H × 4.7 in / 12 cm W × 5.9 in / 15 cm D.

Why It Works

• Vertical reserve-roll stack frees floor and counter: Unlike floor stands or tank-top stacks, vertical wall storage keeps 4-5 rolls within reach without occupying floor space — useful in narrow water closets where every inch of floor matters.
• Bottom slot for the in-use roll, top stack for reserves: Unlike multi-fixture setups (basic holder + separate spare-roll basket), this single piece covers both functions — load the bottom from above and rotate spares down naturally.
• Powder-coated steel handles bathroom humidity: Unlike unfinished bare metal that can show humidity spots in poorly ventilated bathrooms, the electrostatic powder-coat finish stays uniform under typical bathroom moisture exposure when wiped dry after heavy splash.
• Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.

Key Specs

• Dimensions: Approximately 17.7 in / 45 cm H × 4.7 in / 12 cm W × 5.9 in / 15 cm D
• Capacity: 1 in-use roll on the bottom slot + 4-5 reserve rolls stacked vertically above
• Material: 1.5 mm cold-rolled steel, electrostatic powder-coated
• Finishes: Black, White, Gold
• Weight: About 1.2 kg / 2.6 lb
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the holder's loaded weight.
• Best placement: Beside the toilet at arm-reach, primary bathrooms, narrow water closets, guest bathrooms

What's Included

• Wall-mounted vertical toilet paper holder (assembled, finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the mounting hole positions on the wall using a level. Drill pilot holes (use a tile-specific carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the unit on the screws via the back-mounted brackets. Install takes under 10 minutes with a basic drill. Load reserve rolls from the top; the in-use roll sits at the bottom slot.

Care

Wipe the powder-coated steel frame with a soft, dry cloth to remove dust and incidental humidity. For deeper cleaning, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor bathroom use; install outside direct shower-spray zones and wipe dry after heavy moisture exposure.

Frequently Asked Questions

How many rolls fit total?
The vertical stack holds 4-5 standard double rolls above the in-use slot at the bottom — about a week's supply in a typical household. Mega rolls fit fewer (3-4) due to larger diameter; single rolls fit slightly more compactly.

What walls and hardware does it work with?
Mounting screws and anchors are included for drywall installations. For tile, plaster, or masonry walls, swap to wall-specific anchors rated for the holder's loaded weight (consider 4-5 rolls plus the holder); use a tile-specific drill bit (carbide-tipped) at low speed for tile.

Is the powder-coat finish safe for humid bathrooms?
Yes. The powder-coated steel finish handles typical bathroom humidity well; for best longevity, install outside direct shower-spray zones and wipe dry after heavy splash. Avoid abrasive cleaners or chemical solvents on the finish. Match the finish to nearby fixtures and use anchors suited to your wall material for the most stable installation.

How do I match the finish to existing bathroom hardware?
Black works with matte-black, chrome, and modern monochrome fixtures; White suits Scandinavian, neutral, and minimalist bathrooms; Gold complements warm metallic faucets, antique brass hardware, and luxury or transitional styles. For the most cohesive look, match the holder finish to the faucet, towel bar, or cabinet pull in your bathroom.

How do I clean the holder?
Wipe the powder-coated frame with a soft, dry cloth or microfiber to remove dust. For sticky spots or product residue, a damp cloth with mild non-abrasive bathroom cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page