Cherry Flower Hanger gives coats, bags, and small carry items a clearer place near the door. The Cherry Flower Hanger from Grandmix laser-cuts cherry-blossom branches with hooks integrated among the petals. Available in 2 finishes (Black, White) across 5 sizes from 18 in / 46 cm to 47 in / 119 cm wide.

Why It Works

• Cherry-blossom silhouette adds floral softness: Unlike industrial or geometric coat racks, the cherry-flower branch silhouette adds botanical detail — fits feminine bedrooms, dressing rooms, garden rooms, and entryways styled with soft pastels or natural-floral palettes.
• Five sizes scale by purpose: The 18-inch size works as a single-coat accent piece; the 47-inch handles full family entryway capacity — pick the wall span and hook count to match the actual usage.
• Slim 0.6-inch standoff with subtle shadow effect: The thin wall spacers create dimension behind the laser-cut petals, so the silhouette reads cleanly even when coats are hanging on the lower hooks.
• Studio-planned proportions: The silhouette, spacing, and finish are reviewed against the listed sizes so the piece reads cleanly on the wall.

Key Specs

• Dimensions: Five sizes (W × H): 18 × 8 in / 46 × 19 cm (3 hooks); 24 × 10 in / 61 × 25 cm (3 hooks); 32 × 13 in / 81 × 34 cm (4 hooks); 39 × 16 in / 99 × 41 cm (5 hooks); 47 × 20 in / 119 × 50 cm (6 hooks). Stands 0.6 in / 1.5 cm from the wall.
• Capacity: 3 to 6 hooks depending on size — coats, jackets, bags, scarves, hats
• Material: 1.5 mm laser-cut steel, electrostatic powder-coated
• Finishes: Black, White
• Weight: From about 0.5 kg / 1.1 lb at the smallest size
• Mounting: Wall-mounted; mounting screws and anchors are included, but choose anchors rated for your wall material and the rack's loaded weight.
• Best placement: Entryway, bedroom, dressing room, feminine-styled interior, garden room

What's Included

• Wall-mounted cherry-flower hanger (size and finish as ordered)
• Mounting screws and wall anchors
• Care instructions

How to Use and Install

Mark the two mounting hole positions on the wall using a level — the rack has integrated keyhole openings at the back. Drill pilot holes (carbide-tipped bit at low speed for tile installations), insert the included wall anchors, and drive the mounting screws. Hang the rack on the screws. Install takes under 10 minutes with a basic drill.

Care

Wipe the powder-coated steel with a soft, dry cloth to remove dust. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure or direct rain.

Frequently Asked Questions

How many coats does each size hold?
3 hooks (18-inch and 24-inch), 4 hooks (32-inch), 5 hooks (39-inch), or 6 hooks (47-inch). The hooks are integrated among the cherry-blossom branches — comfortable for coats, jackets, bags, scarves, or hats. Choose the size by hook count and wall span, then use anchors rated for the wall material and expected load.

How does it mount to the wall?
Two screws hang the rack on the wall via the back-mounted brackets. Mounting screws are included; choose anchors rated for your wall material (drywall, plaster, masonry, or tile) and the rack's loaded weight. Use a level for alignment, and a carbide-tipped drill bit at low speed for tile installations.

Can it be installed in humid spots like bathrooms or covered porches?
The powder-coated steel finish handles standard indoor humidity well — entryways, mudrooms, hallways, and bedrooms are all fine. Bathroom installations are workable away from direct shower spray; avoid prolonged moisture exposure and rinse off any salt-spray. Direct outdoor rain isn't recommended.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes — both finishes pair well across entryways, mudrooms, and bedrooms. Match the rack finish to entryway hooks, console legs, or door hardware for the most cohesive look.

How do I clean the rack?
Wipe the powder-coated steel with a soft, dry cloth or microfiber to remove dust. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page