The Elegant Metal Wood Rack is a horizontal firewood rack with a wood-plank upper surface for fireplaces, cabins, garages, and covered outdoor hearth areas. Its V-shaped metal frame stores split logs below while the surface softens the look and gives the hearth a small staging area.

The metal frame is made from powder-coated galvanized metal with a rust-resistant and water-resistant finish for indoor rooms and covered outdoor zones. Use it when the firewood rack should feel closer to furniture while still organizing daily-use logs. For related dual-use designs, see Firewood Racks with Tabletop.

Why It Works

• V-frame geometry breaks up the visual mass: The angled V-form reads as architectural detail rather than a plain rectangle, pairing with modern, mid-century, and architectural interiors where standard horizontal racks look generic.
• Wood-plank upper doubles as bench or display surface: The light-wood surface works as a low perching seat, fireplace tool tray, or decor staging surface, so a single footprint serves two functions on the hearth.
• Lightweight horizontal footprint suits low-mantel rooms: 40-inch wide stacking sits along the hearth wall instead of stacking tall, keeping the visual line below the mantel and not blocking art or TV mounting above.
• Grandmix finish check: Cut, coated, packed, and checked so the visible edges, finish, and mounting points arrive ready for everyday placement.

Key Specs

• Dimensions: One size (H × W × D): 20 × 40 × 12 in / 50 × 100 × 30 cm.
• Capacity: Approximately 18-25 standard fireplace-cut split logs in the open V-frame beneath the wood-plank upper (horizontal hearth-side storage)
• Material: powder-coated galvanized metal V-frame with light wood-plank upper
• Finishes: Black, White, Gold
• Weight: About 7 kg / 15.4 lb
• Mounting: Free-standing, no mounting hardware required; sits flat on the floor or hearth on a flat, level surface.
• Placement: Living room hearth, fireplace nook, family room, sunroom

What's Included

• Free-standing elegant V-frame metal wood rack with wood-plank upper (finish as ordered)
• Care instructions

How to Use and Install

Place the unit flat on the floor next to the fireplace or hearth on a level surface. Stack split logs in the open V-frame beneath the bench-upper, distributing weight evenly across the frame. The wood-plank upper doubles as a low bench seat or display shelf for fireplace tools, log carrier, or decor. No tools or mounting hardware are required.

Care

Wipe the powder-coated galvanized metal with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor placement next to the fireplace or hearth; covered porch use is acceptable on a flat, level surface. Rinse off any salt-spray and wipe dry. The powder-coated galvanized metal finish is rust-resistant and water-resistant for indoor rooms, garages, covered patios, and outdoor fireplace areas, and is suitable for covered outdoor use. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

Frequently Asked Questions

How many logs does it hold?
Designed for standard fireplace-cut split logs in the 14 to 18 inch length range. The open V-frame beneath the wood-plank upper holds approximately 18 to 25 split logs depending on log diameter and how tightly stacked. Load logs perpendicular to the bench-upper length, with the largest splits at the floor for low center of gravity.

How stable is the V-frame when fully loaded?
The V-frame creates a wide base footprint that distributes log weight outward when used on a flat, level floor. Distribute logs evenly across the V-trough length to avoid one-sided loading. The wood-plank upper adds upper-stability by tying the V-arms together at the upper for extra rigidity.

Can I use it on an outdoor patio?
It's designed for indoor placement next to the fireplace, hearth, or mudroom on a flat, level surface. Covered porch use is acceptable in dry weather. Rinse off any salt-spray and wipe dry. Extended outdoor exposure or direct rain isn't recommended for the powder-coat finish or the wood-plank upper.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and warm metallic or transitional decor. Match the firewood rack finish to fireplace tools, fender legs, or hearth accessories for the most cohesive look.

How do I clean the firewood rack?
Wipe the powder-coated galvanized metal with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page