Modern Vinyl Record gives everyday rooms a clearer focal point without overcomplicating the room. The Modern Vinyl Record Rack from Grandmix is a geometric metal magazine and record holder with an angled silhouette, sized for about 30 magazines or a comparable mix of vinyl sleeves, hardcover books, and files. Available in 3 finishes (Black, White, Gold) at approximately 12 in / 30 cm H × 16 in / 40 cm W × 6.4 in / 16 cm D.

Why It Works

• Angled geometric frame doubles as decor: Unlike basic upright magazine baskets that read as office storage, the angled metal silhouette adds an architectural line to the room. It works as a sculptural piece in living rooms, study corners, and reception areas while still doing the job.
• Holds about 30 magazines, plus vinyl, books, and files: Wide enough at 16 inches to hold standard 12-inch vinyl sleeves upright, deep enough for hardcover books, and tall enough for stacked magazines or A4 files. One rack covers reading material, records, and reference.
• Free-standing on a flat floor: Ships in two parts that assemble in minutes. Place it on the floor near a sofa, desk, or reading chair, with no wall anchors and no permanent fixtures, easy to relocate when the room layout changes.
• Built for repeat use: The structure is planned for ordinary handling, regular cleaning, and long-term placement in the rooms listed above.

Key Specs

• Dimensions: Approximately 12 in / 30 cm H × 16 in / 40 cm W × 6.4 in / 16 cm D
• Capacity: About 30 magazines, or a comparable mix of vinyl sleeves, hardcover books, and files
• Material: 15 × 15 mm metal pipe, electrostatic powder-coated
• Finishes: Black, White, Gold
• Weight: About 4 kg / 8.8 lb
• Mounting: Free-standing on a flat floor (ships in two parts; minor assembly)
• Best placement: Living room beside the sofa, study corner, home office, reception area

What's Included

• Modern Vinyl Record metal rack (ships in two parts, finish as ordered)
• Connecting hardware for two-part assembly
• Care instructions

How to Use and Install

Unbox the two metal sections and join them using the included hardware, typically under 10 minutes with a basic screwdriver. Place the assembled rack on a flat floor near a sofa, reading chair, or desk. Load magazines flat-stacked, vinyl sleeves upright, and books between for a layered look. The open metal frame keeps each item visible at a glance.

Care

Wipe the powder-coated metal frame with a soft, dry cloth to remove dust. For sticky spots, use a damp cloth with mild non-abrasive cleaner; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. The unit is designed for indoor use; avoid prolonged moisture exposure.

Frequently Asked Questions

What does it actually hold (magazines, vinyl, or books)?
All three. The 16-inch width fits standard 12-inch vinyl sleeves upright; the depth and slot profile suit stacked magazines, A4 files, and hardcover books. Capacity is about 30 magazines or the equivalent mix, fewer if you load thicker books or vinyl sleeves with gatefolds.

Is assembly required?
Light assembly. The rack ships in two parts that connect with included hardware, typically under 10 minutes with a basic screwdriver. Once joined, the metal pipe frame is rigid and free-standing; no anchoring needed on flat floors.

Where does it work best in the home?
Best beside a sofa, reading chair, study desk, or in a home office or reception nook. The slim 6.4-inch depth keeps walkways clear; the geometric silhouette suits modern, mid-century, and minimalist interiors. Avoid placing it where moisture is heavy.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and luxury or transitional decor. Match the rack finish to nearby furniture, hardware, or fixtures for the most cohesive look.

How do I clean and maintain it?
Wipe the powder-coated metal frame with a soft, dry cloth or microfiber to remove dust. For sticky spots, use a damp cloth with mild non-abrasive cleaner; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time.

You can check our Shipping Policy page