The Portable V Shaped Metal Wood Rack is a compact V-cradle log holder for fireplaces, cabins, garages, and covered outdoor hearth areas. Its angled frame helps split logs settle inward, keeping the stack grouped while giving the holder a clean geometric profile beside the hearth.

Built from powder-coated galvanized DKP steel, the rack is finished for indoor rooms, covered patios, garages, and outdoor fireplace zones. The portable format suits daily-use firewood that moves between storage and fireplace areas. For similar clean-frame options, see Minimalist Firewood Racks.

Why It Works

• V-cradle stabilizes logs as you pull from the front: Gravity holds remaining logs back into the V-trough as you remove front logs — no rolling, no upper stack collapsing onto your hands when you reach for an evening fire log.
• Wide hearth-width footprint suits low-profile decor: 31-inch width sits low and wide along the hearth wall instead of stacking tall — useful in living rooms where ceiling clearance matters or where you want the rack visually below the fireplace mantel sightline.
• Lightweight enough to relocate seasonally: About 8.8 lb empty makes it easy to move from porch to indoor hearth as seasons change, or to clear for hearth cleaning.
• Detail-led production: The design is cut and finished with attention to the outline, mounting points, and surface quality customers see first.

Key Specs

• Dimensions: One size (H × W × D): 24.5 × 31.8 × 12.3 in / 62 × 81 × 31 cm.
• Capacity: Approximately 15-20 standard fireplace-cut split logs cradled in the V-shape — sized for evening fires and weekend use
• Material: powder-coated galvanized DKP steel, V-shaped open frame
• Finishes: Black, White, Gold
• Weight: About 4 kg / 8.8 lb
• Mounting: Free-standing and portable — no mounting hardware required; lightweight enough to relocate between fireplace and storage spot.
• Placement: Living room hearth, fireplace nook, covered porch

What's Included

• Free-standing V-shaped portable wood rack (finish as ordered)
• Care instructions

How to Use and Install

Place the unit flat on the floor next to the fireplace or hearth on a level surface. Load the largest split logs at the bottom for a low center of gravity, then stack medium logs above for stability. Distribute weight evenly across the frame — avoid loading heavily on one side. No tools or mounting hardware are required.

Care

Wipe the powder-coated galvanized DKP steel with a soft, dry cloth to remove dust and bark debris. For deeper cleaning, a damp cloth with mild non-abrasive cleaner works; avoid abrasive cleaners or chemical solvents that can dull the powder-coat finish. Designed for indoor placement next to the fireplace or hearth; covered porch use is acceptable on a flat, level surface — rinse off any salt-spray and wipe dry. The powder-coated galvanized DKP steel finish is rust-proof and weatherproof for indoor rooms, garages, covered patios, and outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

Frequently Asked Questions

How many logs does it hold?
Designed for standard fireplace-cut split logs in the 14 to 18 inch length range. The V-cradle holds approximately 15 to 20 split logs depending on log diameter — sized for evening fires, weekend use, or as a hearth-side companion to a larger porch wood pile. Stack logs perpendicular to the V-trough length.

Will the logs roll out of the V?
The V-trough cradles logs at an angle that uses gravity to hold them in place — front logs lean inward against the back logs. Pulling from the front works smoothly without disturbing the rest. For maximum stability, place the largest split logs at the bottom of the V and smaller pieces above.

Where does it work good — indoor or covered porch?
Designed primarily for indoor placement next to the fireplace or hearth on a flat, level floor. Covered porch use is acceptable in dry weather — rinse off any salt-spray and wipe dry. The powder-coated galvanized DKP steel finish is rust-proof and weatherproof for indoor rooms, garages, covered patios, and outdoor fireplace areas. Wipe the surface clean after heavy exposure and follow any model-specific mounting or care guidance.

How do I match the finish to existing decor?
Black works with matte-black, chrome, and modern monochrome interiors; White suits Scandinavian, neutral, and minimalist palettes; Gold complements warm metallic accents, brass hardware, and warm metallic or transitional decor. Match the firewood rack finish to fireplace tools, fender legs, or hearth accessories for the most cohesive look.

How do I clean the firewood rack?
Wipe the powder-coated galvanized DKP steel with a soft, dry cloth or microfiber to remove dust and bark debris. For sticky spots, a damp cloth with mild non-abrasive cleaner works; avoid abrasive scouring pads or chemical solvents that can dull the powder-coat finish over time. Rinse off any salt-spray promptly.

You can check our Shipping Policy page